HP ScsnJet 2400 on Mandrake 9. I can make them work together. What

I have this HP scanjet 2400 an Linux Mabdrake 9. I use the Mandrake
Control Center to recognize my scanner but SANE doesn't support it. What
can i do to use my scanner on Linux. I will appreciate if you help me.

Thanks

Best regards

Luis Duran



-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Re: HP ScsnJet 2400 on Mandrake 9. I can make them work together.

Check dll.conf in /etc/sane.d or /etc/sane and make sure that the line
that says just hp is not commented out.

Chris B



On Fri, 2003-09-05 at 14:37, Luis Duran wrote:
> I have this HP scanjet 2400 an Linux Mabdrake 9. I use the Mandrake
> Control Center to recognize my scanner but SANE doesn't support it. What
> can i do to use my scanner on Linux. I will appreciate if you help me.
>
> Thanks
>
> Best regards
>
> Luis Duran
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-admin" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

HP ScsnJet 2400 on Mandrake 9. I can make them work together. What

It is not commented, the only hp entry in the dll.conf file commented is
the hpoj one. i left it commented 'cause my scanner is not an Office
Jet. It is an HP ScanJet 2400. Digital FlatBed Scanner.

cat /proc/bus/usb/devices shows :

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=ce81f000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=1904 Rev= 1.00
S: Manufacturer=Hewlett-Packard
S: Product=DeskJet 3820
S: SerialNumber=CN2C41N1HK18
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=0a01 Rev= 1.01
S: Manufacturer=Hewlett-Packard
S: Product=hp scanjet scanner
S: SerialNumber=CN35DS11V8
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 48mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms

i will appreciate if you help me to use my scanner with linux.

Best regards and thanks you.

Luis Duran

On Sat, 2003-09-06 at 13:35, Chris Brandstetter wrote:
> Check dll.conf in /etc/sane.d or /etc/sane and make sure that the line
> that says just hp is not commented out.
>
> Chris B
>
>
>
> On Fri, 2003-09-05 at 14:37, Luis Duran wrote:
> > I have this HP scanjet 2400 an Linux Mabdrake 9. I use the Mandrake
> > Control Center to recognize my scanner but SANE doesn't support it. What
> > can i do to use my scanner on Linux. I will appreciate if you help me.
> >
> > Thanks
> >
> > Best regards
> >
> > Luis Duran
> >
> >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-admin" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> -
> To unsubscribe from this list: send the line "unsubscribe linux-admin" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html