Changing media type of network card

Hi,
I have a Intel EtherExpress/100 ethernet card. I would like to
change the media type to 10base2. However, any attempt of doing this
using ifconfig gives the error Operation Not Supported. Is there any
way I can change this ?
Thanks in advance.
Anindya.
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Re: Changing media type of network card

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

El [ Sat 25, Jun 05 - 13:52 ] , Anindya Mozumdar expreso:
> Hi,
> I have a Intel EtherExpress/100 ethernet card. I would like to
> change the media type to 10base2. However, any attempt of doing this
> using ifconfig gives the error Operation Not Supported. Is there any
> way I can change this ?

Try mii-tool, to do so, you should first find out what capabilities this
card supports. To do that, you could issue the command 'mii-tool -vv'.

This is the output for one of my network cards:

- -=|[@lambda - root]: /]#> mii-tool eth0 -vv
Using SIOCGMIIPHY=0x8947
eth0: negotiated 100baseTx-FD, link ok
registers for MII PHY 1:
3100 786d 0000 8201 01e1 45e1 0001 0000
0000 0000 0000 0000 0000 0000 0000 0000
000c 0080 0000 0023 0c59 0406 0200 8560
8a7b 01f9 0000 0000 0000 0000 0000 0000
product info: vendor 00:00:20, model 32 rev 1
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control

To change it, you could do something like this "mii-tool -F ", where
media is one of the supported capabilities.

Not every capability listed is always available. If this network card is attached to
a switch port that is not in autonegotiation mode, then you'll have to change this,
either to force it to the selected media type, or to be in autonegotiation mode.

Cheers !!
- --
# Emiliano Castagnari
[ -=========================================================== =============- ]
('> # Debian Sarge - GNU/Linux - lambda 2.6.12-l01 #
Gnu / (/) # JID: torian@lug.fi.uba.ar
'-- - } [ Libera tu mente - Libera tu Codigo ] { -
[ -=========================================================== =============- ]
[ GPGKey: http://gpg.lug.fi.uba.ar:11371/pks/lookup?op=get&search=0x0B 8AF76F ]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)

iD8DBQFCvywkbsFzaguK928RAuylAJ4yBkwuuN8RnGFJn4Cqn2+ixQOk4wCa A+nd
aAO9NvumX8VyivWCgD6MyDw=
=pxo7
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Re: Changing media type of network card

On 6/27/05, Emiliano Castagnari wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> El [ Sat 25, Jun 05 - 13:52 ] , Anindya Mozumdar expreso:
> > Hi,
> > I have a Intel EtherExpress/100 ethernet card. I would like to
> > change the media type to 10base2. However, any attempt of doing this
> > using ifconfig gives the error Operation Not Supported. Is there any
> > way I can change this ?
>
> Try mii-tool, to do so, you should first find out what capabilities this
> card supports. To do that, you could issue the command 'mii-tool -vv'.
>
> This is the output for one of my network cards:
>
> - -=|[@lambda - root]: /]#> mii-tool eth0 -vv
> Using SIOCGMIIPHY=0x8947
> eth0: negotiated 100baseTx-FD, link ok
> registers for MII PHY 1:
> 3100 786d 0000 8201 01e1 45e1 0001 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 000c 0080 0000 0023 0c59 0406 0200 8560
> 8a7b 01f9 0000 0000 0000 0000 0000 0000
> product info: vendor 00:00:20, model 32 rev 1
> basic mode: autonegotiation enabled
> basic status: autonegotiation complete, link ok
> capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
> advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
> link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
>
> To change it, you could do something like this "mii-tool -F ", where
> media is one of the supported capabilities.
>
> Not every capability listed is always available. If this network card is attached to
> a switch port that is not in autonegotiation mode, then you'll have to change this,
> either to force it to the selected media type, or to be in autonegotiation mode.
>
> Cheers !!
> - --
> # Emiliano Castagnari
> [ -=========================================================== =============- ]
> ('> # Debian Sarge - GNU/Linux - lambda 2.6.12-l01 #
> Gnu / (/) # JID: torian@lug.fi.uba.ar
> '-- - } [ Libera tu mente - Libera tu Codigo ] { -
> [ -=========================================================== =============- ]
> [ GPGKey: http://gpg.lug.fi.uba.ar:11371/pks/lookup?op=get&search=0x0B 8AF76F ]
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.5 (GNU/Linux)
>
> iD8DBQFCvywkbsFzaguK928RAuylAJ4yBkwuuN8RnGFJn4Cqn2+ixQOk4wCa A+nd
> aAO9NvumX8VyivWCgD6MyDw=
> =pxo7
> -----END PGP SIGNATURE-----
> -
> To unsubscribe from this list: send the line "unsubscribe linux-admin" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>

If mii-tool doesn't work for you , try ethtool
--
-------------------------
Alexander Economou
Systems & Network
Administrator
-------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html