Don"t get DBI module installed
am 22.09.2005 09:14:44 von Stephan.Schwalb
Hello,
I got a problem when trying to install DBI-1.48 module on a solaris 2.8 box. The error is:
root@tccsrs14 # make
/bin/sh -c true
cc -c -D_REENTRANT -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.48\" -DXS_VERSION=\"1.48\"
-KPIC -I/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi/ CORE Perl.c
sh: cc: not found
*** Error code 1
make: Fatal error: Command failed for target `Perl.o'
I do have gcc package installed on the system. ?? Anyone having an idea ?
Many thanks in advance
Stephan
Below is some more output:
root@tccsrs14 # perl Makefile.PL
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
Checking if your kit is complete...
Looks good
I see you're using perl 5.006001 on sun4-solaris-thread-multi, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
root@tccsrs14 # perl -V
Summary of my perl5 (revision 5.0 version 6 subversion 1) configuration:
Platform:
osname=solaris, osvers=2.6, archname=sun4-solaris-thread-multi
uname='sunos cassiopee 5.6 generic_105181-23 sun4u sparc sunw,ultra-5_10 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O',
cppflags='-D_REENTRANT -I/usr/local/include'
ccversion='Sun WorkShop 6 update 2 C 5.3 Patch 111679-09 2002/11/12', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, usemymalloc=y, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib -L/tools/shared/sun/forte6u2/SUNWspro/WS6U2/lib '
libpth=/usr/local/lib /tools/shared/sun/forte6u2/SUNWspro/WS6U2/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lposix4 -lpthread -lc
perllibs=-lsocket -lnsl -ldl -lm -lposix4 -lpthread -lc
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-KPIC', lddlflags='-G -L/usr/local/lib -L/tools/shared/sun/forte6u2/SUNWspro/WS6U2/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY USE_ITHREADS USE_LARGE_FILES PERL_IMPLICIT_CONTEXT
Built under solaris
Compiled at Apr 3 2003 10:58:20
@INC:
/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi
/opt/InfoVista/ivperl/lib/5.6.1
/opt/InfoVista/ivperl/lib/site_perl/5.6.1/sun4-solaris-threa d-multi
/opt/InfoVista/ivperl/lib/site_perl/5.6.1
/opt/InfoVista/ivperl/lib/site_perl
.
root@tccsrs14 # make
/usr/bin/perl -I/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi -I/opt/InfoVista/ivperl/lib/5.6.1 -MExtUtils::Command -e m
kpath blib/lib/DBI
rm -f blib/lib/DBI/Changes.pm
cp Changes blib/lib/DBI/Changes.pm
/usr/bin/perl -I/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi -I/opt/InfoVista/ivperl/lib/5.6.1 -MExtUtils::Command -e m
kpath blib/lib/DBI
rm -f blib/lib/DBI/Roadmap.pm
cp Roadmap.pod blib/lib/DBI/Roadmap.pm
/bin/sh -c true
cp Driver_xst.h blib/arch/auto/DBI/Driver_xst.h
cp lib/DBI/ProfileDumper.pm blib/lib/DBI/ProfileDumper.pm
cp Roadmap.pod blib/lib/Roadmap.pod
cp DBIXS.h blib/arch/auto/DBI/DBIXS.h
cp lib/DBI/DBD/Metadata.pm blib/lib/DBI/DBD/Metadata.pm
cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm
cp dbipport.h blib/arch/auto/DBI/dbipport.h
cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h
cp lib/DBI/Const/GetInfoReturn.pm blib/lib/DBI/Const/GetInfoReturn.pm
cp lib/DBI/Const/GetInfo/ANSI.pm blib/lib/DBI/Const/GetInfo/ANSI.pm
cp lib/DBI/PurePerl.pm blib/lib/DBI/PurePerl.pm
cp lib/DBI/Profile.pm blib/lib/DBI/Profile.pm
cp lib/DBI/SQL/Nano.pm blib/lib/DBI/SQL/Nano.pm
cp lib/DBD/File.pm blib/lib/DBD/File.pm
cp DBI.pm blib/lib/DBI.pm
cp lib/DBD/DBM.pm blib/lib/DBD/DBM.pm
cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm
cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm
cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm
cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm
cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm
cp dbivport.h blib/arch/auto/DBI/dbivport.h
cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm
cp lib/DBI/ProfileData.pm blib/lib/DBI/ProfileData.pm
cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm
cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm
cp lib/DBI/Const/GetInfoType.pm blib/lib/DBI/Const/GetInfoType.pm
cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h
cp lib/DBI/ProfileDumper/Apache.pm blib/lib/DBI/ProfileDumper/Apache.pm
cp Driver.xst blib/arch/auto/DBI/Driver.xst
cp lib/DBI/Const/GetInfo/ODBC.pm blib/lib/DBI/Const/GetInfo/ODBC.pm
cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm
/usr/bin/perl -p -e "s/~DRIVER~/Perl/g" ./Driver.xst > Perl.xsi
/usr/bin/perl -I/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi -I/opt/InfoVista/ivperl/lib/5.6.1 /opt/InfoVista/ivperl/li
b/5.6.1/ExtUtils/xsubpp -typemap /opt/InfoVista/ivperl/lib/5.6.1/ExtUtils/typemap -typemap typemap Perl.xs > Perl.xsc && mv Perl.xs
c Perl.c
cc -c -D_REENTRANT -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.48\" -DXS_VERSION=\"1.48\"
-KPIC -I/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi/ CORE Perl.c
sh: cc: not found
*** Error code 1
make: Fatal error: Command failed for target `Perl.o'
root@tccsrs14 #
__________________________________________________
Mit freundlichen Gruessen / With kind regards / Saludos
Dipl. Ing. Stephan Schwalb
Address: Fasanenweg 9, D-70771 Leinfelden-Echterdingen, Germany
Postal Address: Fasanenweg 5, D-70771 Leinfelden-Echterdingen, Germany
Phone.: +49 (711)-972-49971
Fax : +49 1805 3344917937
Mobile: +49 (170)-1605187
E-mail: mailto:Stephan.Schwalb@t-systems.com
Web: http://www.t-systems.de
__________________________________________________
Re: Don"t get DBI module installed
am 22.09.2005 18:26:14 von jdw
You need to build DBI with the same C compiler that was used to build the version of Perl
that you are using. The Perl 5.6.1 that comes with Solaris 8 was built with the Sun Forte C
compiler. You probably don't have the Sun compiler, or you wouldn't get the error you are
getting. The Sun C compiler is not free like gcc.
In order to use gcc to build new modules, you need to have a Perl that was built with gcc.
You can download the Perl source and build it using gcc. Install the new Perl into /usr/local.
The Sun built version is in /usr -- don't remove it, because some Solaris utilities use that
version. Then make sure that your PATH has /usr/local/bin before /usr/bin.
Building from source is not difficult and doesn't take that long. The default 32-bit
configuration should work well. Options USE_64_BIT_INT and USE_LARGE_FILES
should not be a problem.
I would not bother with USE_64_BIT_ALL unless you expect to use multi-gigabytes
of storage within a single program. Building a USE_64_BIT_ALL version is complicated
by needing to get 64-bit versions of all of the external C libraries in the right place. I
have done it, but it is not easy, and that is another story.
Stephan.Schwalb@t-systems.com wrote:
> Hello,
>
> I got a problem when trying to install DBI-1.48 module on a solaris 2.8 box. The error is:
> root@tccsrs14 # make
> /bin/sh -c true
> cc -c -D_REENTRANT -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.48\" -DXS_VERSION=\"1.48\"
> -KPIC -I/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi/ CORE Perl.c
> sh: cc: not found
> *** Error code 1
> make: Fatal error: Command failed for target `Perl.o'
>
> I do have gcc package installed on the system. ?? Anyone having an idea ?
> Many thanks in advance
>
> Stephan
>
> Below is some more output:
> root@tccsrs14 # perl Makefile.PL
>
> *** You are using a perl configured with threading enabled.
> *** You should be aware that using multiple threads is
> *** not recommended for production environments.
>
> *** Note:
> The optional PlRPC-modules (RPC::PlServer etc) are not installed.
> If you want to use the DBD::Proxy driver and DBI::ProxyServer
> modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
> Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
> You can install them any time after installing the DBI.
> You do *not* need these modules for typical DBI usage.
>
> Optional modules are available from any CPAN mirror, in particular
> http://search.cpan.org/
> http://www.perl.com/CPAN/modules/by-module
> http://www.perl.org/CPAN/modules/by-module
> ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
>
> Creating DBI::PurePerl test variant: t/zvpp_01basics.t
> Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
> Creating DBI::PurePerl test variant: t/zvpp_03handle.t
> Creating DBI::PurePerl test variant: t/zvpp_04mods.t
> Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t
> Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
> Creating DBI::PurePerl test variant: t/zvpp_07kids.t
> Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
> Creating DBI::PurePerl test variant: t/zvpp_09trace.t
> Creating DBI::PurePerl test variant: t/zvpp_10examp.t
> Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
> Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
> Creating DBI::PurePerl test variant: t/zvpp_15array.t
> Creating DBI::PurePerl test variant: t/zvpp_20meta.t
> Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
> Creating DBI::PurePerl test variant: t/zvpp_40profile.t
> Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
> Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
> Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
> Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
> Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
> Checking if your kit is complete...
> Looks good
>
> I see you're using perl 5.006001 on sun4-solaris-thread-multi, okay.
> Remember to actually *read* the README file!
> Use 'make' to build the software (dmake or nmake on Windows).
> Then 'make test' to execute self tests.
> Then 'make install' to install the DBI and then delete this working
> directory before unpacking and building any DBD::* drivers.
>
> Writing Makefile for DBI
> root@tccsrs14 # perl -V
> Summary of my perl5 (revision 5.0 version 6 subversion 1) configuration:
> Platform:
> osname=solaris, osvers=2.6, archname=sun4-solaris-thread-multi
> uname='sunos cassiopee 5.6 generic_105181-23 sun4u sparc sunw,ultra-5_10 '
> config_args=''
> hint=recommended, useposix=true, d_sigaction=define
> usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
> useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
> use64bitint=undef use64bitall=undef uselongdouble=undef
> Compiler:
> cc='cc', ccflags ='-D_REENTRANT -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
cc='cc' above shows that the Sun compiler was used to build Perl, not gcc.
>
> optimize='-O',
> cppflags='-D_REENTRANT -I/usr/local/include'
> ccversion='Sun WorkShop 6 update 2 C 5.3 Patch 111679-09 2002/11/12', gccversion='', gccosandvers=''
> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
> ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
> alignbytes=8, usemymalloc=y, prototype=define
> Linker and Libraries:
> ld='cc', ldflags =' -L/usr/local/lib -L/tools/shared/sun/forte6u2/SUNWspro/WS6U2/lib '
> libpth=/usr/local/lib /tools/shared/sun/forte6u2/SUNWspro/WS6U2/lib /usr/lib /usr/ccs/lib
> libs=-lsocket -lnsl -ldl -lm -lposix4 -lpthread -lc
> perllibs=-lsocket -lnsl -ldl -lm -lposix4 -lpthread -lc
> libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
> Dynamic Linking:
> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
> cccdlflags='-KPIC', lddlflags='-G -L/usr/local/lib -L/tools/shared/sun/forte6u2/SUNWspro/WS6U2/lib'
>
> Characteristics of this binary (from libperl):
> Compile-time options: MULTIPLICITY USE_ITHREADS USE_LARGE_FILES PERL_IMPLICIT_CONTEXT
> Built under solaris
> Compiled at Apr 3 2003 10:58:20
> @INC:
> /opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi
> /opt/InfoVista/ivperl/lib/5.6.1
> /opt/InfoVista/ivperl/lib/site_perl/5.6.1/sun4-solaris-threa d-multi
> /opt/InfoVista/ivperl/lib/site_perl/5.6.1
> /opt/InfoVista/ivperl/lib/site_perl
> .
> root@tccsrs14 # make
> /usr/bin/perl -I/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi -I/opt/InfoVista/ivperl/lib/5.6.1 -MExtUtils::Command -e m
> kpath blib/lib/DBI
> rm -f blib/lib/DBI/Changes.pm
> cp Changes blib/lib/DBI/Changes.pm
> /usr/bin/perl -I/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi -I/opt/InfoVista/ivperl/lib/5.6.1 -MExtUtils::Command -e m
> kpath blib/lib/DBI
> rm -f blib/lib/DBI/Roadmap.pm
> cp Roadmap.pod blib/lib/DBI/Roadmap.pm
> /bin/sh -c true
> cp Driver_xst.h blib/arch/auto/DBI/Driver_xst.h
> cp lib/DBI/ProfileDumper.pm blib/lib/DBI/ProfileDumper.pm
> cp Roadmap.pod blib/lib/Roadmap.pod
> cp DBIXS.h blib/arch/auto/DBI/DBIXS.h
> cp lib/DBI/DBD/Metadata.pm blib/lib/DBI/DBD/Metadata.pm
> cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm
> cp dbipport.h blib/arch/auto/DBI/dbipport.h
> cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h
> cp lib/DBI/Const/GetInfoReturn.pm blib/lib/DBI/Const/GetInfoReturn.pm
> cp lib/DBI/Const/GetInfo/ANSI.pm blib/lib/DBI/Const/GetInfo/ANSI.pm
> cp lib/DBI/PurePerl.pm blib/lib/DBI/PurePerl.pm
> cp lib/DBI/Profile.pm blib/lib/DBI/Profile.pm
> cp lib/DBI/SQL/Nano.pm blib/lib/DBI/SQL/Nano.pm
> cp lib/DBD/File.pm blib/lib/DBD/File.pm
> cp DBI.pm blib/lib/DBI.pm
> cp lib/DBD/DBM.pm blib/lib/DBD/DBM.pm
> cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm
> cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm
> cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm
> cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm
> cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm
> cp dbivport.h blib/arch/auto/DBI/dbivport.h
> cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm
> cp lib/DBI/ProfileData.pm blib/lib/DBI/ProfileData.pm
> cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm
> cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm
> cp lib/DBI/Const/GetInfoType.pm blib/lib/DBI/Const/GetInfoType.pm
> cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h
> cp lib/DBI/ProfileDumper/Apache.pm blib/lib/DBI/ProfileDumper/Apache.pm
> cp Driver.xst blib/arch/auto/DBI/Driver.xst
> cp lib/DBI/Const/GetInfo/ODBC.pm blib/lib/DBI/Const/GetInfo/ODBC.pm
> cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm
> /usr/bin/perl -p -e "s/~DRIVER~/Perl/g" ./Driver.xst > Perl.xsi
> /usr/bin/perl -I/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi -I/opt/InfoVista/ivperl/lib/5.6.1 /opt/InfoVista/ivperl/li
> b/5.6.1/ExtUtils/xsubpp -typemap /opt/InfoVista/ivperl/lib/5.6.1/ExtUtils/typemap -typemap typemap Perl.xs > Perl.xsc && mv Perl.xs
> c Perl.c
> cc -c -D_REENTRANT -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.48\" -DXS_VERSION=\"1.48\"
> -KPIC -I/opt/InfoVista/ivperl/lib/5.6.1/sun4-solaris-thread-multi/ CORE Perl.c
> sh: cc: not found
> *** Error code 1
> make: Fatal error: Command failed for target `Perl.o'
> root@tccsrs14 #
>
> __________________________________________________
> Mit freundlichen Gruessen / With kind regards / Saludos
>
> Dipl. Ing. Stephan Schwalb
>
> Address: Fasanenweg 9, D-70771 Leinfelden-Echterdingen, Germany
> Postal Address: Fasanenweg 5, D-70771 Leinfelden-Echterdingen, Germany
> Phone.: +49 (711)-972-49971
> Fax : +49 1805 3344917937
> Mobile: +49 (170)-1605187
> E-mail: mailto:Stephan.Schwalb@t-systems.com
> Web: http://www.t-systems.de
> __________________________________________________
--
James D. White (jdw@ou.edu)
Director of Bioinformatics
Department of Chemistry and Biochemistry/ACGT
University of Oklahoma
101 David L. Boren Blvd., SRTC 2100
Norman, OK 73019
Phone: (405) 325-4912, FAX: (405) 325-7762