Slackware, RAID1 problem

Hi all,
I have a big problem with this RAID thing :)
My system is Linux Slackware 9.1, uname -r --> 2.4.22
I have two SCSI disks (SEAGATE)
I use this howtos
http://slacksite.com/slackware/raid.html
http://unthought.net/Software-RAID.HOWTO/Software-RAID.HOWTO -1.html
And many more ofcourse.
1. So I install Linux on scsi 2 (with kernel supporting raid & scsi)
2. make partitions on scsi 1 of fd type.
3. Then creating md0, md1 , etc...
4. Next step is to mount /dev/md0 and cp the system there.
5. then edit /etc/fstab & /etc/lilo.conf
6. lilo -r /mnt, lilo, lilo -q, etc. Here is the problem.
After reboot the *old* lilo.conf is started (also are the raid arrays :) ).

I don't know if I explained it right.

Any help is appriciated :)

P.S. Sorry for my bad english.


-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs