what is PCI to PCMCIA adaptor device name

Hello,

I installed a PCI to PCMCIA card adaptor in my desktop PC with Fedora
3. Apparently, it is detected as Ismod shows:
yenta_socket 21705 1
rsrc_nonstatic 12737 1 yenta_socket
pcmcia_core 50013 2 yenta_socket, rsrc_nonstatic

I have a 3G wireless modem connected to th adaptor.

However, I couldn't find a device name under /dev/. Can someone tell
me what and where is the device name? Is it configurable?

Thanks,

Simon
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Re: what is PCI to PCMCIA adaptor device name

On 7/7/06, Simon Wu wrote:
> Hello,
>
> I installed a PCI to PCMCIA card adaptor in my desktop PC with Fedora
> 3. Apparently, it is detected as Ismod shows:
> yenta_socket 21705 1
> rsrc_nonstatic 12737 1 yenta_socket
> pcmcia_core 50013 2 yenta_socket, rsrc_nonstatic
>
> I have a 3G wireless modem connected to th adaptor.
>
> However, I couldn't find a device name under /dev/. Can someone tell
> me what and where is the device name? Is it configurable?
>

Could you provide us lspci output?
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Re: what is PCI to PCMCIA adaptor device name

On 7/7/06, Rajat Jain wrote:
> On 7/7/06, Simon Wu wrote:
> > Hello,
> >
> > I installed a PCI to PCMCIA card adaptor in my desktop PC with Fedora
> > 3. Apparently, it is detected as Ismod shows:
> > yenta_socket 21705 1
> > rsrc_nonstatic 12737 1 yenta_socket
> > pcmcia_core 50013 2 yenta_socket, rsrc_nonstatic
> >
> > I have a 3G wireless modem connected to th adaptor.
> >
> > However, I couldn't find a device name under /dev/. Can someone tell
> > me what and where is the device name? Is it configurable?
> >
>
> Could you provide us lspci output?
>

Here is the lspci:
02:0a.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- SERR- Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: Dell Optiplex GX240
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- SERR- Latency: 64 (2500ns min, 2500ns max), Cache Line Size 10
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc80 [size=128]
Region 1: Memory at ff6fd000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at ff700000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:00.0 Network controller: Unknown device 1931:000c
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- SERR- Interrupt: pin A routed to IRQ 11
Region 0: Memory at 20800000 (32-bit, non-prefetchable)
[disabled] [size=2K]
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs