Nokia VPN210

Hello, I'm new on this group, and I've two questions:

1. How may I change the administrator password - maybe though serial, but I
don't know how to connect via serial to VPN - HyperTerminal told me that
com2 is busy.
2. I've 2 sites with that Nokia, but I want when user log to gateway1 that
he may use resources on gateway2. In this day user must log on gateway2 whe
he want use resources from site2. Something like tunnel between sites, but
how ?

Please give hints what I may configure this,

Thanks
Best regards
Thomas.

Re: Nokia VPN210

OK, I log to my firewall via SSH, but I don't know how change the password ?
I type clish, set admin passwd, but I have information about 8 haracters, I
have 10 without %!@ etc.

point 2 is actual, I don't know how setr the site-to-site VPN tunnel clear
for users.
Help

THANKS best regards

Thomas


U¿ytkownik "Tomasz K." napisa³ w wiadomo¶ci
news:epctv4$5be$1@nemesis.news.tpi.pl...
> Hello, I'm new on this group, and I've two questions:
>
> 1. How may I change the administrator password - maybe though serial, but
> I don't know how to connect via serial to VPN - HyperTerminal told me that
> com2 is busy.
> 2. I've 2 sites with that Nokia, but I want when user log to gateway1 that
> he may use resources on gateway2. In this day user must log on gateway2
> whe he want use resources from site2. Something like tunnel between sites,
> but how ?
>
> Please give hints what I may configure this,
>
> Thanks
> Best regards
> Thomas.
>

Re: Nokia VPN210

OK, I change the administrator password.

Please help me with site-to-site

Best regards
Thomas



U¿ytkownik "Tomasz K." napisa³ w wiadomo¶ci
news:epdb8g$nel$1@atlantis.news.tpi.pl...
> OK, I log to my firewall via SSH, but I don't know how change the password
> ?
> I type clish, set admin passwd, but I have information about 8 haracters,
> I have 10 without %!@ etc.
>
> point 2 is actual, I don't know how setr the site-to-site VPN tunnel clear
> for users.
> Help
>
> THANKS best regards
>
> Thomas
>
>
> U¿ytkownik "Tomasz K." napisa³ w wiadomo¶ci
> news:epctv4$5be$1@nemesis.news.tpi.pl...
>> Hello, I'm new on this group, and I've two questions:
>>
>> 1. How may I change the administrator password - maybe though serial, but
>> I don't know how to connect via serial to VPN - HyperTerminal told me
>> that com2 is busy.
>> 2. I've 2 sites with that Nokia, but I want when user log to gateway1
>> that he may use resources on gateway2. In this day user must log on
>> gateway2 whe he want use resources from site2. Something like tunnel
>> between sites, but how ?
>>
>> Please give hints what I may configure this,
>>
>> Thanks
>> Best regards
>> Thomas.
>>
>
>

Re: Nokia VPN210

Thomas,
A vpn210? Wow... that's an old box. I guess the newest CP release available
for vpn210 was... 4.1SP6, and that box went end of sale 6 years & 9 days
ago: https://support.nokia.com/home/static/productsSupported.htm

To reset the admin password you need physical access to the box and boot
it up in single user mode. The vpn210 used ipso 3.4 or lower. Please
review these for details:
http://www.securitydocs.com/pdf/422.PDF
http://www.securitydocs.com/library/422

The tunnel is defined in the Checkpoint FW-1 GUI, a client that will
need to be installed on a client PC. You will however need to add the ip
address of this pc in the $FWDIR/conf/gui-clients file and you also need
the checkpoint credentials to be able to login and get access to it.

Good luck!

Lars

Tomasz K. wrote:
: OK, I log to my firewall via SSH, but I don't know how change the password ?
: I type clish, set admin passwd, but I have information about 8 haracters, I
: have 10 without %!@ etc.

: point 2 is actual, I don't know how setr the site-to-site VPN tunnel clear
: for users.
: Help

: THANKS best regards

: Thomas


: U¿ytkownik "Tomasz K." napisa³ w wiadomo¶ci
: news:epctv4$5be$1@nemesis.news.tpi.pl...
: > Hello, I'm new on this group, and I've two questions:
: >
: > 1. How may I change the administrator password - maybe though serial, but
: > I don't know how to connect via serial to VPN - HyperTerminal told me that
: > com2 is busy.
: > 2. I've 2 sites with that Nokia, but I want when user log to gateway1 that
: > he may use resources on gateway2. In this day user must log on gateway2
: > whe he want use resources from site2. Something like tunnel between sites,
: > but how ?
: >
: > Please give hints what I may configure this,
: >
: > Thanks
: > Best regards
: > Thomas.
: >



--

Re: Nokia VPN210

Tomasz K. wrote:
: OK, I change the administrator password.

: Please help me with site-to-site

Hi Thomas,
Good you made it this far! :)

There are several ways to do this and I think it would be useful for you
to read some documentation on this topic:

Check Point Getting Started Guide: http://www.checkpoint.com/support/technical/documents/versio n_4.1_sp1/EntGS.pdf
PKI Integration with VPN-1/FireWall-1 and SecuRemote: http://www.checkpoint.com/support/technical/documents/pki_in tegration_1_4.pdf

Your firewalls are however very old and can't run any new software
versions, so you should *really* start planning to get replacements if
you care about security.

Good luck!

Lars

: U¿ytkownik "Tomasz K." napisa³ w wiadomo¶ci
: news:epdb8g$nel$1@atlantis.news.tpi.pl...
: > OK, I log to my firewall via SSH, but I don't know how change the password
: > ?
: > I type clish, set admin passwd, but I have information about 8 haracters,
: > I have 10 without %!@ etc.
: >
: > point 2 is actual, I don't know how setr the site-to-site VPN tunnel clear
: > for users.
: > Help
: >
: > THANKS best regards
: >
: > Thomas
: >
: >
: > U¿ytkownik "Tomasz K." napisa³ w wiadomo¶ci
: > news:epctv4$5be$1@nemesis.news.tpi.pl...
: >> Hello, I'm new on this group, and I've two questions:
: >>
: >> 1. How may I change the administrator password - maybe though serial, but
: >> I don't know how to connect via serial to VPN - HyperTerminal told me
: >> that com2 is busy.
: >> 2. I've 2 sites with that Nokia, but I want when user log to gateway1
: >> that he may use resources on gateway2. In this day user must log on
: >> gateway2 whe he want use resources from site2. Something like tunnel
: >> between sites, but how ?
: >>
: >> Please give hints what I may configure this,
: >>
: >> Thanks
: >> Best regards
: >> Thomas.
: >>
: >
: >



--