Firewall routing for P2P routers

I recently had to reset to factory defaults on my watchguard SOHO 6
firewall and lost all my routes I had setup for two P2P locations. I
thought I remembered how this was setup before but cant' seem to
figure it out.

Here is our current setup.

Main Location --> LAN IP Address - 192.168.111.3/24
Serial 0/0 IP - 172.16.2.1/30 (P2P Location #1)
Serial 0/1 IP - 172.16.3.1/30 (P2P Location #2)
IP Address Range - 192.168.111.1-254
Subnet - 255.255.255.0
Gateway Address - 192.168.111.1 (Firewall)


P2P Location #1 --> LAN IP Address - 192.168.1.2/24
Serial 0 IP - 172.16.2.2/30
IP Gateway Address - 192.168.1.2
IP Address Range - 192.168.1.1-254
Subnet - 255.255.255.0

P2P Location #2 --> LAN IP Address - 192.168.3.1/24
Serial 1 IP - 172.16.3.2/30
IP Gateway Address - 192.168.2.1
IP Address Range - 192.168.2.1-254
Subnet - 255.255.255.0

All P2P routers are configured correctly and up and running. I believe
it is just the firewall blocking the connection to the main location.
Thank you in advance for your help.

Re: Firewall routing for P2P routers

On Apr 8, 5:10 am, "jeff" wrote:
> I recently had to reset to factory defaults on my watchguard SOHO 6
> firewall and lost all my routes I had setup for two P2P locations. I
> thought I remembered how this was setup before but cant' seem to
> figure it out.
>
> Here is our current setup.
>
> Main Location --> LAN IP Address - 192.168.111.3/24
> Serial 0/0 IP - 172.16.2.1/30 (P2P Location #1)
> Serial 0/1 IP - 172.16.3.1/30 (P2P Location #2)
> IP Address Range - 192.168.111.1-254
> Subnet - 255.255.255.0
> Gateway Address - 192.168.111.1 (Firewall)
>
> P2P Location #1 --> LAN IP Address - 192.168.1.2/24
> Serial 0 IP - 172.16.2.2/30
> IP Gateway Address - 192.168.1.2
> IP Address Range - 192.168.1.1-254
> Subnet - 255.255.255.0
>
> P2P Location #2 --> LAN IP Address - 192.168.3.1/24
> Serial 1 IP - 172.16.3.2/30
> IP Gateway Address - 192.168.2.1
> IP Address Range - 192.168.2.1-254
> Subnet - 255.255.255.0
>
> All P2P routers are configured correctly and up and running. I believe
> it is just the firewall blocking the connection to the main location.
> Thank you in advance for your help.

so what is the problem you are having? no traffic getting through to
the main site?? what are the results of a traceroute?

Flamer.

Re: Firewall routing for P2P routers

On Apr 9, 11:34 pm, "flamer die.s...@hotmail.com"
wrote:
> On Apr 8, 5:10 am, "jeff" wrote:
>
>
>
>
>
> > I recently had to reset to factory defaults on my watchguard SOHO 6
> > firewall and lost all my routes I had setup for two P2P locations. I
> > thought I remembered how this was setup before but cant' seem to
> > figure it out.
>
> > Here is our current setup.
>
> > Main Location --> LAN IP Address - 192.168.111.3/24
> > Serial 0/0 IP - 172.16.2.1/30 (P2P Location #1)
> > Serial 0/1 IP - 172.16.3.1/30 (P2P Location #2)
> > IP Address Range - 192.168.111.1-254
> > Subnet - 255.255.255.0
> > Gateway Address - 192.168.111.1 (Firewall)
>
> > P2P Location #1 --> LAN IP Address - 192.168.1.2/24
> > Serial 0 IP - 172.16.2.2/30
> > IP Gateway Address - 192.168.1.2
> > IP Address Range - 192.168.1.1-254
> > Subnet - 255.255.255.0
>
> > P2P Location #2 --> LAN IP Address - 192.168.3.1/24
> > Serial 1 IP - 172.16.3.2/30
> > IP Gateway Address - 192.168.2.1
> > IP Address Range - 192.168.2.1-254
> > Subnet - 255.255.255.0
>
> > All P2P routers are configured correctly and up and running. I believe
> > it is just the firewall blocking the connection to the main location.
> > Thank you in advance for your help.
>
> so what is the problem you are having? no traffic getting through to
> the main site?? what are the results of a traceroute?
>
> Flamer.- Hide quoted text -
>
> - Show quoted text -

correct...figured it out yesterday. setup host routes on the firewall
like these:

192.168.1.2 --> 192.168.111.3
192.168.2.1 --> 192.168.111.3
192.168.111.3 --> 192.168.1.2
192.168.111.3 --> 192.168.2.1