php not parsing on local machine

I've got php files that I'm running without the .php extensions.
I'm forcing them to be parsed as php which works fine on my server but
on my local machine the browser actually tries to download these types
of files instead of parsing them.

The browser adds the .php extension and then prompts for download.

I'm using the zend core locally.

Below is my httpd.conf

Any ideas? Thank you!

===================================

#
# This is the main Apache HTTP server configuration file. It contains
the
# configuration directives that give the server its instructions.
# See for detailed
information.
# In particular, see
#
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are
unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for
many
# of the server's control files begin with "/" (or "drive:/" for
Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Zend/Apache2" will be
interpreted by the
# server as "C:/Program Files/Zend/Apache2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is
located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

# ThreadsPerChild: constant number of worker threads in the server
process
# MaxRequestsPerChild: maximum number of requests a server process
serves
ThreadsPerChild 250
MaxRequestsPerChild 0

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile
directive
# at a local disk. If you wish to share the same ServerRoot for
multiple
# httpd daemons, you will need to change at least LockFile and
PidFile.
#
ServerRoot "C:/Program Files/Zend/Apache2"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a
DSO you
# have to place corresponding `LoadModule' lines at this location so
the
# directives contained in it are actually available _before_ they are
used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# definition. These values also provide defaults for
# any containers you may define later in the file.
#
# All of these directives may appear inside containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin @@ServerAdmin@@

#
# ServerName gives the name and port that the server uses to identify
itself.
# This can often be determined automatically, but we recommend you
specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP
address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory,
but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/var/www"

#
# Each directory to which Apache has access can be configured with
respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#

Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Satisfy all



#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options
All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please
see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed
in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride All

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all



#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#

DirectoryIndex index.php index.html


#
# The following lines prevent .htaccess and .htpasswd files from
being
# viewed by Web clients.
#

Order allow,deny
Deny from all


#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a

# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn


#
# The following directives define some format nicknames for use
with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common


# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
Agent}i\" %I %O" combinedio


#
# The location and format of the access logfile (Common Logfile
Format).
# If you do not define any access logfiles within a
# container, they will be logged here. Contrariwise, if you *do*
# define per- access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access.log common

#
# If you prefer a logfile with access, agent, and referer
information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access.log combined



#
# Redirect: Allows you to tell clients about documents that used
to
# exist in your server's namespace, but do not anymore. The
client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server
scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications
and
# run by the server when requested rather than as documents sent
to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "C:/Program Files/Zend/Apache2/cgi-bin/"



#
# "C:/Program Files/Zend/Apache2/cgi-bin" should be changed to
whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#

AllowOverride None
Options None
Order allow,deny
Allow from all


#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the
symbols
# pound (#) and exclamation (!) followed by the path of the program
that
# can execute this specific script. For a perl script, with perl.exe
in
# the C:\Program Files\Perl directory, the shebang line should be:

#!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be
the
# first line of the file. Of course, CGI processing must be enabled
by
# the appropriate ScriptAlias or Options ExecCGI directives for the
files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or
can
# use the Registry to match files by extention. The command to
execute
# a file of this type is retrieved from the registry by the same
method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer
View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the
Edit
# button allows you to modify the Actions, of which Apache 1.3
attempts to
# perform the 'Open' Action, and failing that it will try the shebang
line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the
means
# to run a program you didn't intend the website owner to invoke, and
the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -
disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual blocks
or the
# .htaccess file, with either the 'registry' (Windows behavior) or
'script'
# (Unix behavior) option, and will override this server default
option.
#

#
# DefaultType: the default MIME type the server will use for a
document
# if it cannot otherwise determine one, such as from filename
extensions.
# If your server contains mostly text or HTML documents, "text/plain"
is
# a good value. If most of your content is binary, such as
applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType application/x-httpd-php

#DefaultType text/plain


#
# TypesConfig points to the file containing the list of mappings
from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to
"handlers":
# actions unrelated to filetype. These can be either built into
the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options"
directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the
client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options"
directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml


#
# The mod_mime_magic module allows the server to use various hints
from the
# contents of the file itself to determine its type. The
MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default
configuration of
# the server, or you may simply copy their contents here and change
as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random
equivalent
# but a statically compiled-in mod_ssl.
#

SSLRandomSeed startup builtin
SSLRandomSeed connect builtin



SetHandler server-info
Order deny,allow
Deny from all
Allow from 127.0.0.1



SetHandler server-status
Order deny,allow
Deny from all
Allow from 127.0.0.1


LoadModule zend_enabler_module "C:/Program Files/Zend/Core/modules/
apache2.2/zend_fcgi.dll"
FastCgiConfig "C:/Program Files/Zend/Core/etc/fastcgi.conf"
AddHandler fastcgi-script .php
AddType application/x-httpd-php .php


Order deny,allow
Allow from all

Alias /ZendCore "C:/Program Files/Zend/Core/GUI"

Re: php not parsing on local machine

On Jun 13, 4:17 am, isound wrote:
> I've got php files that I'm running without the .php extensions.
> I'm forcing them to be parsed as php which works fine on my server but
> on my local machine the browser actually tries to download these types
> of files instead of parsing them.
>
> The browser adds the .php extension and then prompts for download.
>
> I'm using the zend core locally.
>
> Below is my httpd.conf
>
> Any ideas? Thank you!
>
> ===================================
>
> #
> # This is the main Apache HTTP server configuration file. It contains
> the
> # configuration directives that give the server its instructions.
> # See for detailed
> information.
> # In particular, see
> #
> # for a discussion of each configuration directive.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They're here only as hints or reminders. If you are
> unsure
> # consult the online docs. You have been warned.
> #
> # Configuration and logfile names: If the filenames you specify for
> many
> # of the server's control files begin with "/" (or "drive:/" for
> Win32), the
> # server will use that explicit path. If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> # with ServerRoot set to "C:/Program Files/Zend/Apache2" will be
> interpreted by the
> # server as "C:/Program Files/Zend/Apache2/logs/foo.log".
> #
> # NOTE: Where filenames are specified, you must use forward slashes
> # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
> # If a drive letter is omitted, the drive on which Apache.exe is
> located
> # will be used by default. It is recommended that you always supply
> # an explicit drive letter in absolute paths, however, to avoid
> # confusion.
> #
>
> # ThreadsPerChild: constant number of worker threads in the server
> process
> # MaxRequestsPerChild: maximum number of requests a server process
> serves
> ThreadsPerChild 250
> MaxRequestsPerChild 0
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # Do not add a slash at the end of the directory path. If you point
> # ServerRoot at a non-local disk, be sure to point the LockFile
> directive
> # at a local disk. If you wish to share the same ServerRoot for
> multiple
> # httpd daemons, you will need to change at least LockFile and
> PidFile.
> #
> ServerRoot "C:/Program Files/Zend/Apache2"
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
> #
> #Listen 12.34.56.78:80
> Listen 80
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a
> DSO you
> # have to place corresponding `LoadModule' lines at this location so
> the
> # directives contained in it are actually available _before_ they are
> used.
> # Statically compiled modules (those listed by `httpd -l') do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> #
> LoadModule actions_module modules/mod_actions.so
> LoadModule alias_module modules/mod_alias.so
> LoadModule asis_module modules/mod_asis.so
> LoadModule auth_basic_module modules/mod_auth_basic.so
> #LoadModule auth_digest_module modules/mod_auth_digest.so
> #LoadModule authn_anon_module modules/mod_authn_anon.so
> #LoadModule authn_dbm_module modules/mod_authn_dbm.so
> LoadModule authn_default_module modules/mod_authn_default.so
> LoadModule authn_file_module modules/mod_authn_file.so
> #LoadModule authz_dbm_module modules/mod_authz_dbm.so
> LoadModule authz_default_module modules/mod_authz_default.so
> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
> LoadModule authz_host_module modules/mod_authz_host.so
> LoadModule authz_user_module modules/mod_authz_user.so
> LoadModule autoindex_module modules/mod_autoindex.so
> #LoadModule cern_meta_module modules/mod_cern_meta.so
> LoadModule cgi_module modules/mod_cgi.so
> #LoadModule dav_module modules/mod_dav.so
> #LoadModule dav_fs_module modules/mod_dav_fs.so
> #LoadModule deflate_module modules/mod_deflate.so
> LoadModule dir_module modules/mod_dir.so
> LoadModule env_module modules/mod_env.so
> #LoadModule expires_module modules/mod_expires.so
> #LoadModule file_cache_module modules/mod_file_cache.so
> #LoadModule headers_module modules/mod_headers.so
> LoadModule imagemap_module modules/mod_imagemap.so
> LoadModule include_module modules/mod_include.so
> LoadModule info_module modules/mod_info.so
> LoadModule isapi_module modules/mod_isapi.so
> LoadModule log_config_module modules/mod_log_config.so
> LoadModule mime_module modules/mod_mime.so
> #LoadModule mime_magic_module modules/mod_mime_magic.so
> #LoadModule proxy_module modules/mod_proxy.so
> #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
> #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
> #LoadModule proxy_connect_module modules/mod_proxy_connect.so
> #LoadModule proxy_http_module modules/mod_proxy_http.so
> #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
> LoadModule negotiation_module modules/mod_negotiation.so
> #LoadModule rewrite_module modules/mod_rewrite.so
> LoadModule setenvif_module modules/mod_setenvif.so
> #LoadModule speling_module modules/mod_speling.so
> LoadModule status_module modules/mod_status.so
> #LoadModule unique_id_module modules/mod_unique_id.so
> LoadModule userdir_module modules/mod_userdir.so
> #LoadModule usertrack_module modules/mod_usertrack.so
> #LoadModule vhost_alias_module modules/mod_vhost_alias.so
> #LoadModule ssl_module modules/mod_ssl.so
>
> # 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # definition. These values also provide defaults for
> # any containers you may define later in the file.
> #
> # All of these directives may appear inside containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents. e.g. a...@your-domain.com
> #
> ServerAdmin @@ServerAdmin@@
>
> #
> # ServerName gives the name and port that the server uses to identify
> itself.
> # This can often be determined automatically, but we recommend you
> specify
> # it explicitly to prevent problems during startup.
> #
> # If your host doesn't have a registered DNS name, enter its IP
> address here.
> #
> ServerName localhost:80
>
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory,
> but
> # symbolic links and aliases may be used to point to other locations.
> #
> DocumentRoot "C:/var/www"
>
> #
> # Each directory to which Apache has access can be configured with
> respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # features.
> #
>
> Options FollowSymLinks
> AllowOverride None
> Order deny,allow
> Deny from all
> Satisfy all
>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
>
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
>
> #
> # Possible values for the Options directive are "None", "All",
> # or any combination of:
> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
> MultiViews
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options
> All"
> # doesn't give it to you.
> #
> # The Options directive is both complicated and important. Please
> see
> #http://httpd.apache.org/docs/2.2/mod/core.html#options
> # for more information.
> #
> Options Indexes FollowSymLinks
>
> #
> # AllowOverride controls what directives may be placed
> in .htaccess files.
> # It can be "All", "None", or any combination of the keywords:
> # Options FileInfo AuthConfig Limit
> #
> AllowOverride All
>
> #
> # Controls who can get stuff from this server.
> #
> Order allow,deny
> Allow from all
>
>
>
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> #
>
> DirectoryIndex index.php index.html
>
>
> #
> # The following lines prevent .htaccess and .htpasswd files from
> being
> # viewed by Web clients.
> #
>
> Order allow,deny
> Deny from all
>
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a
>
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog logs/error.log
>
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
>
> #
> # The following directives define some format nicknames for use
> with
> # a CustomLog directive (see below).
> #
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
> Agent}i\"" combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
>
> # You need to enable mod_logio.c to use %I and %O
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
> Agent}i\" %I %O" combinedio
>
>
> #
> # The location and format of the access logfile (Common Logfile
> Format).
> # If you do not define any access logfiles within a
> # container, they will be logged here. Contrariwise, if you *do*
> # define per- access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> CustomLog logs/access.log common
>
> #
> # If you prefer a logfile with access, agent, and referer
> information
> # (Combined Logfile Format) you can use the following directive.
> #
> #CustomLog logs/access.log combined
>
>
>
> #
> # Redirect: Allows you to tell clients about documents that used
> to
> # exist in your server's namespace, but do not anymore. The
> client
> # will make a new request for the document at its new location.
> # Example:
> # Redirect permanent /foohttp://www.example.com/bar
>
> #
> # Alias: Maps web paths into filesystem paths and is used to
> # access content that does not live under the DocumentRoot.
> # Example:
> # Alias /webpath /full/filesystem/path
> #
> # If you include a trailing / on /webpath then the server will
> # require it to be present in the URL. You will also likely
> # need to provide a section to allow access to
> # the filesystem path.
>
> #
> # ScriptAlias: This controls which directories contain server
> scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the target directory are treated as applications
> and
> # run by the server when requested rather than as documents sent
> to the
> # client. The same rules about trailing "/" apply to ScriptAlias
> # directives as to Alias.
> #
> ScriptAlias /cgi-bin/ "C:/Program Files/Zend/Apache2/cgi-bin/"
>
>
>
> #
> # "C:/Program Files/Zend/Apache2/cgi-bin" should be changed to
> whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
>
> AllowOverride None
> Options None
> Order allow,deny
> Allow from all
>
>
> #
> # Apache parses all CGI scripts for the shebang line by default.
> # This comment line, the first line of the script, consists of the
> symbols
> # pound (#) and exclamation (!) followed by the path of the program
> that
> # can execute this specific script. For a perl script, with perl.exe
> in
> # the C:\Program Files\Perl directory, the shebang line should be:
>
> #!c:/program files/perl/perl
>
> # Note you _must_not_ indent the actual shebang line, and it must be
> the
> # first line of the file. Of course, CGI processing must be enabled
> by
> # the appropriate ScriptAlias or Options ExecCGI directives for the
> files
> # or directory in question.
> #
> # However, Apache on Windows allows either the Unix behavior above, or
> can
> # use the Registry to match files by extention. The command to
> execute
> # a file of this type is retrieved from the registry by the same
> method as
> # the Windows Explorer would use to handle double-clicking on a file.
> # These script actions can be configured from the Windows Explorer
> View menu,
> # 'Folder Options', and reviewing the 'File Types' tab. Clicking the
> Edit
> # button allows you to modify the Actions, of which Apache 1.3
> attempts to
> # perform the 'Open' Action, and failing that it will try the shebang
> line.
> # This behavior is subject to change in Apache release 2.0.
> #
> # Each mechanism has it's own specific security weaknesses, from the
> means
> # to run a program you didn't intend the website owner to invoke, and
> the
> # best method is a matter of great debate.
> #
> # To enable the this Windows specific behavior (and therefore -
> disable- the
> # equivilant Unix behavior), uncomment the following directive:
> #
> #ScriptInterpreterSource registry
> #
> # The directive above can be placed in individual blocks
> or the
> # .htaccess file, with either the 'registry' (Windows behavior) or
> 'script'
> # (Unix behavior) option, and will override this server default
> option.
> #
>
> #
> # DefaultType: the default MIME type the server will use for a
> document
> # if it cannot otherwise determine one, such as from filename
> extensions.
> # If your server contains mostly text or HTML documents, "text/plain"
> is
> # a good value. If most of your content is binary, such as
> applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> DefaultType application/x-httpd-php
>
> #DefaultType text/plain
>
>
> #
> # TypesConfig points to the file containing the list of mappings
> from
> # filename extension to MIME-type.
> #
> TypesConfig conf/mime.types
>
> #
> # AddType allows you to add to or override the MIME configuration
> # file specified in TypesConfig for specific file types.
> #
> #AddType application/x-gzip .tgz
> #
> # AddEncoding allows you to have certain browsers uncompress
> # information on the fly. Note: Not all browsers support this.
> #
> #AddEncoding x-compress .Z
> #AddEncoding x-gzip .gz .tgz
> #
> # If the AddEncoding directives above are commented-out, then you
> # probably should define those extensions to indicate media types:
> #
> AddType application/x-compress .Z
> AddType application/x-gzip .gz .tgz
>
> #
> # AddHandler allows you to map certain file extensions to
> "handlers":
> # actions unrelated to filetype. These can be either built into
> the server
> # or added with the Action directive (see below)
> #
> # To use CGI scripts outside of ScriptAliased directories:
> # (You will also need to add "ExecCGI" to the "Options"
> directive.)
> #
> #AddHandler cgi-script .cgi
>
> # For type maps (negotiated resources):
> #AddHandler type-map var
>
> #
> # Filters allow you to process content before it is sent to the
> client.
> #
> # To parse .shtml files for server-side includes (SSI):
> # (You will also need to add "Includes" to the "Options"
> directive.)
> #
> #AddType text/html .shtml
> #AddOutputFilter INCLUDES .shtml
>
>
> #
> # The mod_mime_magic module allows the server to use various hints
> from the
> # contents of the file itself to determine its type. The
> MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> #MIMEMagicFile conf/magic
>
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 "The server made a boo boo."
> #ErrorDocument 404 /missing.html
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> #ErrorDocument 402http://www.example.com/subscription_info.html
> #
>
> #
> # EnableMMAP and EnableSendfile: On systems that support it,
> # memory-mapping or the sendfile syscall is used to deliver
> # files. This usually improves server performance, but must
> # be turned off when serving from networked-mounted
> # filesystems or if support for these functions is otherwise
> # broken on your system.
> #
> #EnableMMAP off
> #EnableSendfile off
>
> # Supplemental configuration
> #
> # The configuration files in the conf/extra/ directory can be
> # included to add extra features or to modify the default
> configuration of
> # the server, or you may simply copy their contents here and change
> as
> # necessary.
>
> # Server-pool management (MPM specific)
> #Include conf/extra/httpd-mpm.conf
>
> # Multi-language error messages
> #Include conf/extra/httpd-multilang-errordoc.conf
>
> # Fancy directory listings
> #Include conf/extra/httpd-autoindex.conf
>
> # Language settings
> #Include conf/extra/httpd-languages.conf
>
> # User home directories
> #Include conf/extra/httpd-userdir.conf
>
> # Real-time info on requests and configuration
> #Include conf/extra/httpd-info.conf
>
> # Virtual hosts
> #Include conf/extra/httpd-vhosts.conf
>
> # Local access to the Apache HTTP Server Manual
> #Include conf/extra/httpd-manual.conf
>
> # Distributed authoring and versioning (WebDAV)
> #Include conf/extra/httpd-dav.conf
>
> # Various default settings
> #Include conf/extra/httpd-default.conf
>
> # Secure (SSL/TLS) connections
> #Include conf/extra/httpd-ssl.conf
> #
> # Note: The following must must be present to support
> # starting without SSL on platforms with no /dev/random
> equivalent
> # but a statically compiled-in mod_ssl.
> #
>
> SSLRandomSeed startup builtin
> SSLRandomSeed connect builtin
>
>
>
> SetHandler server-info
> Order deny,allow
> Deny from all
> Allow from 127.0.0.1
>
>
>
> SetHandler server-status
> Order deny,allow
> Deny from all
> Allow from 127.0.0.1
>
>
> LoadModule zend_enabler_module "C:/Program Files/Zend/Core/modules/
> apache2.2/zend_fcgi.dll"
> FastCgiConfig "C:/Program Files/Zend/Core/etc/fastcgi.conf"
> AddHandler fastcgi-script .php
> AddType application/x-httpd-php .php
>
>
> Order deny,allow
> Allow from all
>
> Alias /ZendCore "C:/Program Files/Zend/Core/GUI"

how did you force the other file types?
do you have an extension on the end of the filename on your working
system.
I would try to use the forcetype directive, but on windows the basic
problem is that the system woeks by looking at extensions.
ForceType application/x-httpd-php

Since what you require can be achieved by rewriting the urls, and
leaving the file extensions in tact, this is the way I would proceed,
as it has the advantage that you can use the OS's default editor-
extension mapping, whereas file with no extensions on windows will be
hard for the OS to recognise (unless you add the "no-extension"
extension and assocaite it manually) and the editors on the OS will
fail to recognise the type of file and won't highlight properly.
So portability means keep things standard and use rewrites instead of
"trickery" to hide the technology you are using. (Bearing in mind that
any half decent hacker will just guess at your tech and get it 95%
right every time, [OS/server/scripting language/database] based on
many other things, not just the file extensions!)