can"t start apache

--0016e6d64486548fff047f9091ae
Content-Type: text/plain; charset=ISO-8859-1

When I try to start I get:
the requested operation failed.

Nothing in the error log.

In event viewer, I get several errors:

The Apache service named reported the following error:
>>> httpd.exe: Could not reliably determine the server's fully qualified
domain name, using 192.168.1.110 for ServerName .

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

The Apache service named reported the following error:
>>> (OS 10049)The requested address is not valid in its context. :
make_sock: could not bind to address 192.168.1.2:80 .

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

The Apache service named reported the following error:
>>> no listening sockets available, shutting down .

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

The Apache service named reported the following error:
>>> Unable to open logs .

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

It has been working properly before today.

Not sure what is going on.

--0016e6d64486548fff047f9091ae
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

When I try to start I get:

Re: can"t start apache

>>>> (OS 10049)The requested address is not valid in its context. =A0:
>>>> make_sock: could not bind to address 192.168.1.2:80 =A0 =A0 .

Is that a valid interface on your system (ipconfig /all) ?

--=20
Eric Covener
covener@gmail.com

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: can"t start apache

--------------------------------------------------
From: "Matthew Smith"
Sent: 14 February, 2010 14:46
To: "users"
Subject: [users@httpd] can't start apache

> When I try to start I get:
> the requested operation failed.
>
> Nothing in the error log.
>
> In event viewer, I get several errors:
>
> The Apache service named reported the following error:
>>>> httpd.exe: Could not reliably determine the server's fully qualified
> domain name, using 192.168.1.110 for ServerName .
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> The Apache service named reported the following error:
>>>> (OS 10049)The requested address is not valid in its context. :
> make_sock: could not bind to address 192.168.1.2:80 .
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> The Apache service named reported the following error:
>>>> no listening sockets available, shutting down .
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> The Apache service named reported the following error:
>>>> Unable to open logs .
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> It has been working properly before today.
>
> Not sure what is going on.
>


Matt,

Are you running the command as an administrator?

Thanks,
Daniel

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: can"t start apache

--0016e6daaff6e553ba047fa6a69d
Content-Type: text/plain; charset=ISO-8859-1

The user account I am logged in as is an admin.

192.168.1.2 is the ip address assigned to the computer.

I just did a clean install of windows and apache, still I'm getting the same
problem.

On Sun, Feb 14, 2010 at 2:11 PM, Daniel Reinhardt
wrote:

>
> --------------------------------------------------
> From: "Matthew Smith"
> Sent: 14 February, 2010 14:46
> To: "users"
> Subject: [users@httpd] can't start apache
>
>
> When I try to start I get:
>> the requested operation failed.
>>
>> Nothing in the error log.
>>
>> In event viewer, I get several errors:
>>
>> The Apache service named reported the following error:
>>
>>> httpd.exe: Could not reliably determine the server's fully qualified
>>>>>
>>>> domain name, using 192.168.1.110 for ServerName .
>>
>> For more information, see Help and Support Center at
>> http://go.microsoft.com/fwlink/events.asp.
>>
>> The Apache service named reported the following error:
>>
>>> (OS 10049)The requested address is not valid in its context. :
>>>>>
>>>> make_sock: could not bind to address 192.168.1.2:80 .
>>
>> For more information, see Help and Support Center at
>> http://go.microsoft.com/fwlink/events.asp.
>>
>> The Apache service named reported the following error:
>>
>>> no listening sockets available, shutting down .
>>>>>
>>>>
>> For more information, see Help and Support Center at
>> http://go.microsoft.com/fwlink/events.asp.
>>
>> The Apache service named reported the following error:
>>
>>> Unable to open logs .
>>>>>
>>>>
>> For more information, see Help and Support Center at
>> http://go.microsoft.com/fwlink/events.asp.
>>
>> It has been working properly before today.
>>
>> Not sure what is going on.
>>
>>
>
> Matt,
>
> Are you running the command as an administrator?
>
> Thanks,
> Daniel
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e6daaff6e553ba047fa6a69d
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Re: can"t start apache

--0016e6dab10036ab86047fa6b6fb
Content-Type: text/plain; charset=ISO-8859-1

Here the conf. I commented out the vhosts and ColdFusion stuff to see if it
would work but it still doesn't. Maybe someone more familiar than me will
spot something?

Sorry for the long post.

------------------------------------------------------
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See >
for detailed information.
# In particular, see
#
>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software
Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software
Foundation/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 192.168.1.2:80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO
you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so


#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon


# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# definition. These values also provide defaults for
# any containers you may define later in the file.
#
# All of these directives may appear inside containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin chedderslam@gmail.com
#
# ServerName gives the name and port that the server uses to identify
itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address
here.
#
#ServerName 192.168.1.2:80
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "z:/inetpub/wwwroot"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#

Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess
files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#

DirectoryIndex index.cfm

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#

Order allow,deny
Deny from all
Satisfy All

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\" %I %O" combinedio

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a
# container, they will be logged here. Contrariwise, if you *do*
# define per- access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access.log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined


#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://192.168.1.2/bar
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software
Foundation/Apache2.2/cgi-bin/"


#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock

#
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be
changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#

AllowOverride None
Options None
Order allow,deny
Allow from all

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the
server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://192.168.1.2/subscription_info.html
#
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#

SSLRandomSeed startup builtin
SSLRandomSeed connect builtin

# JRun Settings
#LoadModule jrun_module
"C:/ColdFusion8/runtime/lib/wsconfig/1/mod_jrun22.so"
#
# JRunConfig Verbose false
# JRunConfig Apialloc false
# JRunConfig Ignoresuffixmap false
# JRunConfig Serverstore
"C:/ColdFusion8/runtime/lib/wsconfig/1/jrunserver.store"
# JRunConfig Bootstrap 127.0.0.1:51800
#JRunConfig Errorurl url
#JRunConfig ProxyRetryInterval 600 trying to reconnect to unreachable clustered server>
#JRunConfig ConnectTimeout 15 connect to a jrun server>
#JRunConfig RecvTimeout 300 receive to a jrun server>
#JRunConfig SendTimeout 15 to a jrun server>
# AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
#

--0016e6dab10036ab86047fa6b6fb
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Re: can"t start apache

--0016e6d99ead67b011047fa6e359
Content-Type: text/plain; charset=ISO-8859-1

Ok, i found this and tried what it said:
http://www.issociate.de/board/post/474531/2.2.6_won't_start_ -_The_Apache2.2_service_terminated_with_service-specific_err or_1_(0x1)..html

I had a directory error which I have resolved.

Now I get :
C:\Program Files\Apache Software Foundation\Apache2.2\bin>httpd.exe -t
Syntax OK

But when I try to start the service, I still get
The requested operation has failed.




On Mon, Feb 15, 2010 at 11:11 AM, Matthew Smith wrote:

> Here the conf. I commented out the vhosts and ColdFusion stuff to see if
> it would work but it still doesn't. Maybe someone more familiar than me
> will spot something?
>
> Sorry for the long post.
>
> ------------------------------------------------------
> #
> # This is the main Apache HTTP server configuration file. It contains the
> # configuration directives that give the server its instructions.
> # See >
> for detailed information.
> # In particular, see
> #
> >
> # for a discussion of each configuration directive.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They're here only as hints or reminders. If you are
> unsure
> # consult the online docs. You have been warned.
> #
> # Configuration and logfile names: If the filenames you specify for many
> # of the server's control files begin with "/" (or "drive:/" for Win32),
> the
> # server will use that explicit path. If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> # with ServerRoot set to "C:/Program Files/Apache Software
> Foundation/Apache2.2" will be interpreted by the
> # server as "C:/Program Files/Apache Software
> Foundation/Apache2.2/logs/foo.log".
> #
> # NOTE: Where filenames are specified, you must use forward slashes
> # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
> # If a drive letter is omitted, the drive on which httpd.exe is located
> # will be used by default. It is recommended that you always supply
> # an explicit drive letter in absolute paths to avoid confusion.
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # Do not add a slash at the end of the directory path. If you point
> # ServerRoot at a non-local disk, be sure to point the LockFile directive
> # at a local disk. If you wish to share the same ServerRoot for multiple
> # httpd daemons, you will need to change at least LockFile and PidFile.
> #
> ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses.
> #
> #Listen 12.34.56.78:80
> Listen 192.168.1.2:80
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a DSO
> you
> # have to place corresponding `LoadModule' lines at this location so the
> # directives contained in it are actually available _before_ they are used.
> # Statically compiled modules (those listed by `httpd -l') do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> #
> LoadModule actions_module modules/mod_actions.so
> LoadModule alias_module modules/mod_alias.so
> LoadModule asis_module modules/mod_asis.so
> LoadModule auth_basic_module modules/mod_auth_basic.so
> #LoadModule auth_digest_module modules/mod_auth_digest.so
> #LoadModule authn_alias_module modules/mod_authn_alias.so
> #LoadModule authn_anon_module modules/mod_authn_anon.so
> #LoadModule authn_dbd_module modules/mod_authn_dbd.so
> #LoadModule authn_dbm_module modules/mod_authn_dbm.so
> LoadModule authn_default_module modules/mod_authn_default.so
> LoadModule authn_file_module modules/mod_authn_file.so
> #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
> #LoadModule authz_dbm_module modules/mod_authz_dbm.so
> LoadModule authz_default_module modules/mod_authz_default.so
> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
> LoadModule authz_host_module modules/mod_authz_host.so
> #LoadModule authz_owner_module modules/mod_authz_owner.so
> LoadModule authz_user_module modules/mod_authz_user.so
> LoadModule autoindex_module modules/mod_autoindex.so
> #LoadModule cache_module modules/mod_cache.so
> #LoadModule cern_meta_module modules/mod_cern_meta.so
> LoadModule cgi_module modules/mod_cgi.so
> #LoadModule charset_lite_module modules/mod_charset_lite.so
> #LoadModule dav_module modules/mod_dav.so
> #LoadModule dav_fs_module modules/mod_dav_fs.so
> #LoadModule dav_lock_module modules/mod_dav_lock.so
> #LoadModule dbd_module modules/mod_dbd.so
> #LoadModule deflate_module modules/mod_deflate.so
> LoadModule dir_module modules/mod_dir.so
> #LoadModule disk_cache_module modules/mod_disk_cache.so
> #LoadModule dumpio_module modules/mod_dumpio.so
> LoadModule env_module modules/mod_env.so
> #LoadModule expires_module modules/mod_expires.so
> #LoadModule ext_filter_module modules/mod_ext_filter.so
> #LoadModule file_cache_module modules/mod_file_cache.so
> #LoadModule filter_module modules/mod_filter.so
> #LoadModule headers_module modules/mod_headers.so
> #LoadModule ident_module modules/mod_ident.so
> #LoadModule imagemap_module modules/mod_imagemap.so
> LoadModule include_module modules/mod_include.so
> #LoadModule info_module modules/mod_info.so
> LoadModule isapi_module modules/mod_isapi.so
> #LoadModule ldap_module modules/mod_ldap.so
> #LoadModule logio_module modules/mod_logio.so
> LoadModule log_config_module modules/mod_log_config.so
> #LoadModule log_forensic_module modules/mod_log_forensic.so
> #LoadModule mem_cache_module modules/mod_mem_cache.so
> LoadModule mime_module modules/mod_mime.so
> #LoadModule mime_magic_module modules/mod_mime_magic.so
> LoadModule negotiation_module modules/mod_negotiation.so
> #LoadModule proxy_module modules/mod_proxy.so
> #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
> #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
> #LoadModule proxy_connect_module modules/mod_proxy_connect.so
> #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
> #LoadModule proxy_http_module modules/mod_proxy_http.so
> #LoadModule rewrite_module modules/mod_rewrite.so
> LoadModule setenvif_module modules/mod_setenvif.so
> #LoadModule speling_module modules/mod_speling.so
> #LoadModule ssl_module modules/mod_ssl.so
> #LoadModule status_module modules/mod_status.so
> #LoadModule substitute_module modules/mod_substitute.so
> #LoadModule unique_id_module modules/mod_unique_id.so
> #LoadModule userdir_module modules/mod_userdir.so
> #LoadModule usertrack_module modules/mod_usertrack.so
> #LoadModule version_module modules/mod_version.so
> #LoadModule vhost_alias_module modules/mod_vhost_alias.so
>
>
> #
> # If you wish httpd to run as a different user or group, you must run
> # httpd as root initially and it will switch.
> #
> # User/Group: The name (or #number) of the user/group to run httpd as.
> # It is usually good practice to create a dedicated user and group for
> # running httpd, as with most system services.
> #
> User daemon
> Group daemon
>
>
> # 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # definition. These values also provide defaults for
> # any containers you may define later in the file.
> #
> # All of these directives may appear inside containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents. e.g. admin@your-domain.com
> #
> ServerAdmin chedderslam@gmail.com
> #
> # ServerName gives the name and port that the server uses to identify
> itself.
> # This can often be determined automatically, but we recommend you specify
> # it explicitly to prevent problems during startup.
> #
> # If your host doesn't have a registered DNS name, enter its IP address
> here.
> #
> #ServerName 192.168.1.2:80
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory, but
> # symbolic links and aliases may be used to point to other locations.
> #
> DocumentRoot "z:/inetpub/wwwroot"
> #
> # Each directory to which Apache has access can be configured with respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # features.
> #
>
> Options FollowSymLinks
> AllowOverride None
> Order deny,allow
> Deny from all
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
>
> #
> # Possible values for the Options directive are "None", "All",
> # or any combination of:
> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
> MultiViews
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
> # doesn't give it to you.
> #
> # The Options directive is both complicated and important. Please see
> # http://httpd.apache.org/docs/2.2/mod/core.html#options
> # for more information.
> #
> Options Indexes FollowSymLinks
> #
> # AllowOverride controls what directives may be placed in .htaccess
> files.
> # It can be "All", "None", or any combination of the keywords:
> # Options FileInfo AuthConfig Limit
> #
> AllowOverride None
> #
> # Controls who can get stuff from this server.
> #
> Order allow,deny
> Allow from all
>
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> #
>
> DirectoryIndex index.cfm
>
> #
> # The following lines prevent .htaccess and .htpasswd files from being
> # viewed by Web clients.
> #
>
> Order allow,deny
> Deny from all
> Satisfy All
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog "logs/error.log"
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
> #
> # The following directives define some format nicknames for use with
> # a CustomLog directive (see below).
> #
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\"" combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
> # You need to enable mod_logio.c to use %I and %O
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\" %I %O" combinedio
>
> #
> # The location and format of the access logfile (Common Logfile
> Format).
> # If you do not define any access logfiles within a
> # container, they will be logged here. Contrariwise, if you *do*
> # define per- access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> CustomLog "logs/access.log" common
> #
> # If you prefer a logfile with access, agent, and referer information
> # (Combined Logfile Format) you can use the following directive.
> #
> #CustomLog "logs/access.log" combined
>
>
> #
> # Redirect: Allows you to tell clients about documents that used to
> # exist in your server's namespace, but do not anymore. The client
> # will make a new request for the document at its new location.
> # Example:
> # Redirect permanent /foo http://192.168.1.2/bar
> #
> # Alias: Maps web paths into filesystem paths and is used to
> # access content that does not live under the DocumentRoot.
> # Example:
> # Alias /webpath /full/filesystem/path
> #
> # If you include a trailing / on /webpath then the server will
> # require it to be present in the URL. You will also likely
> # need to provide a section to allow access to
> # the filesystem path.
> #
> # ScriptAlias: This controls which directories contain server scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the target directory are treated as applications and
> # run by the server when requested rather than as documents sent to the
> # client. The same rules about trailing "/" apply to ScriptAlias
> # directives as to Alias.
> #
> ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software
> Foundation/Apache2.2/cgi-bin/"
>
>
> #
> # ScriptSock: On threaded servers, designate the path to the UNIX
> # socket used to communicate with the CGI daemon of mod_cgid.
> #
> #Scriptsock logs/cgisock
>
> #
> # "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be
> changed to whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
>
> AllowOverride None
> Options None
> Order allow,deny
> Allow from all
>
> #
> # DefaultType: the default MIME type the server will use for a document
> # if it cannot otherwise determine one, such as from filename extensions.
> # If your server contains mostly text or HTML documents, "text/plain" is
> # a good value. If most of your content is binary, such as applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> DefaultType text/plain
>
> #
> # TypesConfig points to the file containing the list of mappings from
> # filename extension to MIME-type.
> #
> TypesConfig conf/mime.types
> #
> # AddType allows you to add to or override the MIME configuration
> # file specified in TypesConfig for specific file types.
> #
> #AddType application/x-gzip .tgz
> #
> # AddEncoding allows you to have certain browsers uncompress
> # information on the fly. Note: Not all browsers support this.
> #
> #AddEncoding x-compress .Z
> #AddEncoding x-gzip .gz .tgz
> #
> # If the AddEncoding directives above are commented-out, then you
> # probably should define those extensions to indicate media types:
> #
> AddType application/x-compress .Z
> AddType application/x-gzip .gz .tgz
> #
> # AddHandler allows you to map certain file extensions to "handlers":
> # actions unrelated to filetype. These can be either built into the
> server
> # or added with the Action directive (see below)
> #
> # To use CGI scripts outside of ScriptAliased directories:
> # (You will also need to add "ExecCGI" to the "Options" directive.)
> #
> #AddHandler cgi-script .cgi
> # For type maps (negotiated resources):
> #AddHandler type-map var
> #
> # Filters allow you to process content before it is sent to the client.
> #
> # To parse .shtml files for server-side includes (SSI):
> # (You will also need to add "Includes" to the "Options" directive.)
> #
> #AddType text/html .shtml
> #AddOutputFilter INCLUDES .shtml
>
> #
> # The mod_mime_magic module allows the server to use various hints from the
> # contents of the file itself to determine its type. The MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> #MIMEMagicFile conf/magic
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 "The server made a boo boo."
> #ErrorDocument 404 /missing.html
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> #ErrorDocument 402 http://192.168.1.2/subscription_info.html
> #
> #
> # EnableMMAP and EnableSendfile: On systems that support it,
> # memory-mapping or the sendfile syscall is used to deliver
> # files. This usually improves server performance, but must
> # be turned off when serving from networked-mounted
> # filesystems or if support for these functions is otherwise
> # broken on your system.
> #
> #EnableMMAP off
> #EnableSendfile off
> # Supplemental configuration
> #
> # The configuration files in the conf/extra/ directory can be
> # included to add extra features or to modify the default configuration of
> # the server, or you may simply copy their contents here and change as
> # necessary.
> # Server-pool management (MPM specific)
> #Include conf/extra/httpd-mpm.conf
> # Multi-language error messages
> #Include conf/extra/httpd-multilang-errordoc.conf
> # Fancy directory listings
> #Include conf/extra/httpd-autoindex.conf
> # Language settings
> #Include conf/extra/httpd-languages.conf
> # User home directories
> #Include conf/extra/httpd-userdir.conf
> # Real-time info on requests and configuration
> #Include conf/extra/httpd-info.conf
> # Virtual hosts
> #Include conf/extra/httpd-vhosts.conf
> # Local access to the Apache HTTP Server Manual
> #Include conf/extra/httpd-manual.conf
> # Distributed authoring and versioning (WebDAV)
> #Include conf/extra/httpd-dav.conf
> # Various default settings
> #Include conf/extra/httpd-default.conf
> # Secure (SSL/TLS) connections
> #Include conf/extra/httpd-ssl.conf
> #
> # Note: The following must must be present to support
> # starting without SSL on platforms with no /dev/random equivalent
> # but a statically compiled-in mod_ssl.
> #
>
> SSLRandomSeed startup builtin
> SSLRandomSeed connect builtin
>
> # JRun Settings
> #LoadModule jrun_module
> "C:/ColdFusion8/runtime/lib/wsconfig/1/mod_jrun22.so"
> #
> # JRunConfig Verbose false
> # JRunConfig Apialloc false
> # JRunConfig Ignoresuffixmap false
> # JRunConfig Serverstore
> "C:/ColdFusion8/runtime/lib/wsconfig/1/jrunserver.store"
> # JRunConfig Bootstrap 127.0.0.1:51800
> #JRunConfig Errorurl url
> #JRunConfig ProxyRetryInterval 600 > trying to reconnect to unreachable clustered server>
> #JRunConfig ConnectTimeout 15 > connect to a jrun server>
> #JRunConfig RecvTimeout 300 > receive to a jrun server>
> #JRunConfig SendTimeout 15 > to a jrun server>
> # AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
> #
>
>
>

--0016e6d99ead67b011047fa6e359
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Re: can"t start apache

On Mon, Feb 15, 2010 at 12:06 PM, Matthew Smith wrote:
> The user account I am logged in as is an admin.
>
> 192.168.1.2 is the ip address assigned to the computer.

Are you sure? Do you have multiple interfaces and/or IPs?

Apache retrieved 192.168.1.110 as the primary address:

"httpd.exe: Could not reliably determine the server's fully qualified
domain name, using 192.168.1.110 for ServerName"

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: can"t start apache

--0016e6d7f07baea075047fa7a1c3
Content-Type: text/plain; charset=ISO-8859-1

I hadn't set up the static lease on my router when I installed apache. 110
was the original ip. I have since set up the server to use 192.168.1.2. I
am connecting to it through remote desktop at .2 right now. Do I need to
change anywhere else because of the new ip?

On Mon, Feb 15, 2010 at 11:39 AM, Jeff Trawick wrote:

> On Mon, Feb 15, 2010 at 12:06 PM, Matthew Smith
> wrote:
> > The user account I am logged in as is an admin.
> >
> > 192.168.1.2 is the ip address assigned to the computer.
>
> Are you sure? Do you have multiple interfaces and/or IPs?
>
> Apache retrieved 192.168.1.110 as the primary address:
>
> "httpd.exe: Could not reliably determine the server's fully qualified
> domain name, using 192.168.1.110 for ServerName"
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e6d7f07baea075047fa7a1c3
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I hadn't set up the static lease on my router when I installed apache. =
=A0110 was the original ip. =A0I have since set up the server to use 192.16=
8.1.2. =A0I am connecting to it through remote desktop at .2 right now. =A0=
Do I need to change anywhere else because of the new ip?

Re: can"t start apache

--0016e6d78419e24215047fa7fae0
Content-Type: text/plain; charset=ISO-8859-1

Ok, I figured it out. I was using a mapped drive for the document root.
Maybe it is a permission issue? I have given full control to everyone, so
I'm not sure what it is.

On Mon, Feb 15, 2010 at 12:17 PM, Matthew Smith wrote:

> I hadn't set up the static lease on my router when I installed apache. 110
> was the original ip. I have since set up the server to use 192.168.1.2. I
> am connecting to it through remote desktop at .2 right now. Do I need to
> change anywhere else because of the new ip?
>
>
> On Mon, Feb 15, 2010 at 11:39 AM, Jeff Trawick wrote:
>
>> On Mon, Feb 15, 2010 at 12:06 PM, Matthew Smith
>> wrote:
>> > The user account I am logged in as is an admin.
>> >
>> > 192.168.1.2 is the ip address assigned to the computer.
>>
>> Are you sure? Do you have multiple interfaces and/or IPs?
>>
>> Apache retrieved 192.168.1.110 as the primary address:
>>
>> "httpd.exe: Could not reliably determine the server's fully qualified
>> domain name, using 192.168.1.110 for ServerName"
>>
>> ------------------------------------------------------------ ---------
>> The official User-To-User support forum of the Apache HTTP Server Project.
>> See for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>
>

--0016e6d78419e24215047fa7fae0
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Ok, I figured it out. =A0I was using a mapped drive for the document root. =
=A0Maybe it is a permission issue? =A0I have given full control to everyone=
, so I'm not sure what it is.

Re: can"t start apache

--------------------------------------------------
From: "Matthew Smith"
Sent: 15 February, 2010 18:42
To:
Subject: Re: [users@httpd] can't start apache

> Ok, I figured it out. I was using a mapped drive for the document root.
> Maybe it is a permission issue? I have given full control to everyone, so
> I'm not sure what it is.
>
> On Mon, Feb 15, 2010 at 12:17 PM, Matthew Smith wrote:
>
>> I hadn't set up the static lease on my router when I installed apache. 110
>> was the original ip. I have since set up the server to use 192.168.1.2. I
>> am connecting to it through remote desktop at .2 right now. Do I need to
>> change anywhere else because of the new ip?
>>
>>
>> On Mon, Feb 15, 2010 at 11:39 AM, Jeff Trawick wrote:
>>
>>> On Mon, Feb 15, 2010 at 12:06 PM, Matthew Smith
>>> wrote:
>>> > The user account I am logged in as is an admin.
>>> >
>>> > 192.168.1.2 is the ip address assigned to the computer.
>>>
>>> Are you sure? Do you have multiple interfaces and/or IPs?
>>>
>>> Apache retrieved 192.168.1.110 as the primary address:
>>>
>>> "httpd.exe: Could not reliably determine the server's fully qualified
>>> domain name, using 192.168.1.110 for ServerName"
>>>
>>> ------------------------------------------------------------ ---------
>>> The official User-To-User support forum of the Apache HTTP Server Project.
>>> See for more info.
>>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>>> For additional commands, e-mail: users-help@httpd.apache.org
>>>
>>>
>>
>

Matt,

The process creates a PID on the main drive, using a shared drive wouldn't
prevent httpd from listening on port 80. You need an account with
administrative privileges to Run Apache. I am guessing your account doesn't
have admin rights. Can you provide us with what version of Windows you are
running?

Thanks,
Daniel


------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: can"t start apache

Check your port "forwarding" on your router. It appears that the IP you
got was on a router and port forwarding for port 80 is not set to
192.168.0.1.

Matthew Smith wrote:
> Ok, i found this and tried what it said:
> http://www.issociate.de/board/post/474531/2.2.6_won't_start_ -_The_Apache2.2_service_terminated_with_service-specific_err or_1_(0x1)..html
>
>
> I had a directory error which I have resolved.
>
> Now I get :
> C:\Program Files\Apache Software Foundation\Apache2.2\bin>httpd.exe -t
> Syntax OK
>
> But when I try to start the service, I still get
> The requested operation has failed.
>
>
>
>
> On Mon, Feb 15, 2010 at 11:11 AM, Matthew Smith > > wrote:
>
> Here the conf. I commented out the vhosts and ColdFusion stuff to
> see if it would work but it still doesn't. Maybe someone more
> familiar than me will spot something?
>
> Sorry for the long post.
>
> ------------------------------------------------------
> #
> # This is the main Apache HTTP server configuration file. It
> contains the
> # configuration directives that give the server its instructions.
> # See > > for detailed information.
> # In particular, see
> # > >
> # for a discussion of each configuration directive.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They're here only as hints or reminders. If you
> are unsure
> # consult the online docs. You have been warned.
> #
> # Configuration and logfile names: If the filenames you specify
> for many
> # of the server's control files begin with "/" (or "drive:/" for
> Win32), the
> # server will use that explicit path. If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> # with ServerRoot set to "C:/Program Files/Apache Software
> Foundation/Apache2.2" will be interpreted by the
> # server as "C:/Program Files/Apache Software
> Foundation/Apache2.2/logs/foo.log".
> #
> # NOTE: Where filenames are specified, you must use forward slashes
> # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
> # If a drive letter is omitted, the drive on which httpd.exe is
> located
> # will be used by default. It is recommended that you always supply
> # an explicit drive letter in absolute paths to avoid confusion.
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # Do not add a slash at the end of the directory path. If you point
> # ServerRoot at a non-local disk, be sure to point the LockFile
> directive
> # at a local disk. If you wish to share the same ServerRoot for
> multiple
> # httpd daemons, you will need to change at least LockFile and
> PidFile.
> #
> ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses.
> #
> #Listen 12.34.56.78:80
> Listen 192.168.1.2:80
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built
> as a DSO you
> # have to place corresponding `LoadModule' lines at this location
> so the
> # directives contained in it are actually available _before_ they
> are used.
> # Statically compiled modules (those listed by `httpd -l') do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> #
> LoadModule actions_module modules/mod_actions.so
> LoadModule alias_module modules/mod_alias.so
> LoadModule asis_module modules/mod_asis.so
> LoadModule auth_basic_module modules/mod_auth_basic.so
> #LoadModule auth_digest_module modules/mod_auth_digest.so
> #LoadModule authn_alias_module modules/mod_authn_alias.so
> #LoadModule authn_anon_module modules/mod_authn_anon.so
> #LoadModule authn_dbd_module modules/mod_authn_dbd.so
> #LoadModule authn_dbm_module modules/mod_authn_dbm.so
> LoadModule authn_default_module modules/mod_authn_default.so
> LoadModule authn_file_module modules/mod_authn_file.so
> #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
> #LoadModule authz_dbm_module modules/mod_authz_dbm.so
> LoadModule authz_default_module modules/mod_authz_default.so
> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
> LoadModule authz_host_module modules/mod_authz_host.so
> #LoadModule authz_owner_module modules/mod_authz_owner.so
> LoadModule authz_user_module modules/mod_authz_user.so
> LoadModule autoindex_module modules/mod_autoindex.so
> #LoadModule cache_module modules/mod_cache.so
> #LoadModule cern_meta_module modules/mod_cern_meta.so
> LoadModule cgi_module modules/mod_cgi.so
> #LoadModule charset_lite_module modules/mod_charset_lite.so
> #LoadModule dav_module modules/mod_dav.so
> #LoadModule dav_fs_module modules/mod_dav_fs.so
> #LoadModule dav_lock_module modules/mod_dav_lock.so
> #LoadModule dbd_module modules/mod_dbd.so
> #LoadModule deflate_module modules/mod_deflate.so
> LoadModule dir_module modules/mod_dir.so
> #LoadModule disk_cache_module modules/mod_disk_cache.so
> #LoadModule dumpio_module modules/mod_dumpio.so
> LoadModule env_module modules/mod_env.so
> #LoadModule expires_module modules/mod_expires.so
> #LoadModule ext_filter_module modules/mod_ext_filter.so
> #LoadModule file_cache_module modules/mod_file_cache.so
> #LoadModule filter_module modules/mod_filter.so
> #LoadModule headers_module modules/mod_headers.so
> #LoadModule ident_module modules/mod_ident.so
> #LoadModule imagemap_module modules/mod_imagemap.so
> LoadModule include_module modules/mod_include.so
> #LoadModule info_module modules/mod_info.so
> LoadModule isapi_module modules/mod_isapi.so
> #LoadModule ldap_module modules/mod_ldap.so
> #LoadModule logio_module modules/mod_logio.so
> LoadModule log_config_module modules/mod_log_config.so
> #LoadModule log_forensic_module modules/mod_log_forensic.so
> #LoadModule mem_cache_module modules/mod_mem_cache.so
> LoadModule mime_module modules/mod_mime.so
> #LoadModule mime_magic_module modules/mod_mime_magic.so
> LoadModule negotiation_module modules/mod_negotiation.so
> #LoadModule proxy_module modules/mod_proxy.so
> #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
> #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
> #LoadModule proxy_connect_module modules/mod_proxy_connect.so
> #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
> #LoadModule proxy_http_module modules/mod_proxy_http.so
> #LoadModule rewrite_module modules/mod_rewrite.so
> LoadModule setenvif_module modules/mod_setenvif.so
> #LoadModule speling_module modules/mod_speling.so
> #LoadModule ssl_module modules/mod_ssl.so
> #LoadModule status_module modules/mod_status.so
> #LoadModule substitute_module modules/mod_substitute.so
> #LoadModule unique_id_module modules/mod_unique_id.so
> #LoadModule userdir_module modules/mod_userdir.so
> #LoadModule usertrack_module modules/mod_usertrack.so
> #LoadModule version_module modules/mod_version.so
> #LoadModule vhost_alias_module modules/mod_vhost_alias.so
>
>
> #
> # If you wish httpd to run as a different user or group, you must run
> # httpd as root initially and it will switch.
> #
> # User/Group: The name (or #number) of the user/group to run httpd as.
> # It is usually good practice to create a dedicated user and group for
> # running httpd, as with most system services.
> #
> User daemon
> Group daemon
>
>
> # 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # definition. These values also provide defaults for
> # any containers you may define later in the file.
> #
> # All of these directives may appear inside containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents. e.g. admin@your-domain.com
>
> #
> ServerAdmin chedderslam@gmail.com
> #
> # ServerName gives the name and port that the server uses to
> identify itself.
> # This can often be determined automatically, but we recommend you
> specify
> # it explicitly to prevent problems during startup.
> #
> # If your host doesn't have a registered DNS name, enter its IP
> address here.
> #
> #ServerName 192.168.1.2:80
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this
> directory, but
> # symbolic links and aliases may be used to point to other locations.
> #
> DocumentRoot "z:/inetpub/wwwroot"
> #
> # Each directory to which Apache has access can be configured with
> respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # features.
> #
>
> Options FollowSymLinks
> AllowOverride None
> Order deny,allow
> Deny from all
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
>
> #
> # Possible values for the Options directive are "None", "All",
> # or any combination of:
> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch
> ExecCGI MultiViews
> #
> # Note that "MultiViews" must be named *explicitly* ---
> "Options All"
> # doesn't give it to you.
> #
> # The Options directive is both complicated and important.
> Please see
> # http://httpd.apache.org/docs/2.2/mod/core.html#options
> # for more information.
> #
> Options Indexes FollowSymLinks
> #
> # AllowOverride controls what directives may be placed in
> .htaccess files.
> # It can be "All", "None", or any combination of the keywords:
> # Options FileInfo AuthConfig Limit
> #
> AllowOverride None
> #
> # Controls who can get stuff from this server.
> #
> Order allow,deny
> Allow from all
>
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> #
>
> DirectoryIndex index.cfm
>
> #
> # The following lines prevent .htaccess and .htpasswd files from
> being
> # viewed by Web clients.
> #
>
> Order allow,deny
> Deny from all
> Satisfy All
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a
>
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog "logs/error.log"
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
> #
> # The following directives define some format nicknames for
> use with
> # a CustomLog directive (see below).
> #
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\"" combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
> # You need to enable mod_logio.c to use %I and %O
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\" %I %O" combinedio
>
> #
> # The location and format of the access logfile (Common
> Logfile Format).
> # If you do not define any access logfiles within a
> # container, they will be logged here. Contrariwise, if you *do*
> # define per- access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> CustomLog "logs/access.log" common
> #
> # If you prefer a logfile with access, agent, and referer
> information
> # (Combined Logfile Format) you can use the following directive.
> #
> #CustomLog "logs/access.log" combined
>
>
> #
> # Redirect: Allows you to tell clients about documents that
> used to
> # exist in your server's namespace, but do not anymore. The
> client
> # will make a new request for the document at its new location.
> # Example:
> # Redirect permanent /foo http://192.168.1.2/bar
> #
> # Alias: Maps web paths into filesystem paths and is used to
> # access content that does not live under the DocumentRoot.
> # Example:
> # Alias /webpath /full/filesystem/path
> #
> # If you include a trailing / on /webpath then the server will
> # require it to be present in the URL. You will also likely
> # need to provide a section to allow access to
> # the filesystem path.
> #
> # ScriptAlias: This controls which directories contain server
> scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the target directory are treated as
> applications and
> # run by the server when requested rather than as documents
> sent to the
> # client. The same rules about trailing "/" apply to ScriptAlias
> # directives as to Alias.
> #
> ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software
> Foundation/Apache2.2/cgi-bin/"
>
>
> #
> # ScriptSock: On threaded servers, designate the path to the UNIX
> # socket used to communicate with the CGI daemon of mod_cgid.
> #
> #Scriptsock logs/cgisock
>
> #
> # "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin"
> should be changed to whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> > Foundation/Apache2.2/cgi-bin">
> AllowOverride None
> Options None
> Order allow,deny
> Allow from all
>
> #
> # DefaultType: the default MIME type the server will use for a
> document
> # if it cannot otherwise determine one, such as from filename
> extensions.
> # If your server contains mostly text or HTML documents,
> "text/plain" is
> # a good value. If most of your content is binary, such as
> applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> DefaultType text/plain
>
> #
> # TypesConfig points to the file containing the list of
> mappings from
> # filename extension to MIME-type.
> #
> TypesConfig conf/mime.types
> #
> # AddType allows you to add to or override the MIME configuration
> # file specified in TypesConfig for specific file types.
> #
> #AddType application/x-gzip .tgz
> #
> # AddEncoding allows you to have certain browsers uncompress
> # information on the fly. Note: Not all browsers support this.
> #
> #AddEncoding x-compress .Z
> #AddEncoding x-gzip .gz .tgz
> #
> # If the AddEncoding directives above are commented-out, then you
> # probably should define those extensions to indicate media types:
> #
> AddType application/x-compress .Z
> AddType application/x-gzip .gz .tgz
> #
> # AddHandler allows you to map certain file extensions to
> "handlers":
> # actions unrelated to filetype. These can be either built
> into the server
> # or added with the Action directive (see below)
> #
> # To use CGI scripts outside of ScriptAliased directories:
> # (You will also need to add "ExecCGI" to the "Options"
> directive.)
> #
> #AddHandler cgi-script .cgi
> # For type maps (negotiated resources):
> #AddHandler type-map var
> #
> # Filters allow you to process content before it is sent to
> the client.
> #
> # To parse .shtml files for server-side includes (SSI):
> # (You will also need to add "Includes" to the "Options"
> directive.)
> #
> #AddType text/html .shtml
> #AddOutputFilter INCLUDES .shtml
>
> #
> # The mod_mime_magic module allows the server to use various hints
> from the
> # contents of the file itself to determine its type. The
> MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> #MIMEMagicFile conf/magic
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 "The server made a boo boo."
> #ErrorDocument 404 /missing.html
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl
> "
> #ErrorDocument 402 http://192.168.1.2/subscription_info.html
> #
> #
> # EnableMMAP and EnableSendfile: On systems that support it,
> # memory-mapping or the sendfile syscall is used to deliver
> # files. This usually improves server performance, but must
> # be turned off when serving from networked-mounted
> # filesystems or if support for these functions is otherwise
> # broken on your system.
> #
> #EnableMMAP off
> #EnableSendfile off
> # Supplemental configuration
> #
> # The configuration files in the conf/extra/ directory can be
> # included to add extra features or to modify the default
> configuration of
> # the server, or you may simply copy their contents here and
> change as
> # necessary.
> # Server-pool management (MPM specific)
> #Include conf/extra/httpd-mpm.conf
> # Multi-language error messages
> #Include conf/extra/httpd-multilang-errordoc.conf
> # Fancy directory listings
> #Include conf/extra/httpd-autoindex.conf
> # Language settings
> #Include conf/extra/httpd-languages.conf
> # User home directories
> #Include conf/extra/httpd-userdir.conf
> # Real-time info on requests and configuration
> #Include conf/extra/httpd-info.conf
> # Virtual hosts
> #Include conf/extra/httpd-vhosts.conf
> # Local access to the Apache HTTP Server Manual
> #Include conf/extra/httpd-manual.conf
> # Distributed authoring and versioning (WebDAV)
> #Include conf/extra/httpd-dav.conf
> # Various default settings
> #Include conf/extra/httpd-default.conf
> # Secure (SSL/TLS) connections
> #Include conf/extra/httpd-ssl.conf
> #
> # Note: The following must must be present to support
> # starting without SSL on platforms with no /dev/random
> equivalent
> # but a statically compiled-in mod_ssl.
> #
>
> SSLRandomSeed startup builtin
> SSLRandomSeed connect builtin
>
> # JRun Settings
> #LoadModule jrun_module
> "C:/ColdFusion8/runtime/lib/wsconfig/1/mod_jrun22.so"
> #
> # JRunConfig Verbose false
> # JRunConfig Apialloc false
> # JRunConfig Ignoresuffixmap false
> # JRunConfig Serverstore
> "C:/ColdFusion8/runtime/lib/wsconfig/1/jrunserver.store"
> # JRunConfig Bootstrap 127.0.0.1:51800
> #JRunConfig Errorurl url > errors>
> #JRunConfig ProxyRetryInterval 600 > before trying to reconnect to unreachable clustered server>
> #JRunConfig ConnectTimeout 15 > socket connect to a jrun server>
> #JRunConfig RecvTimeout 300 > socket receive to a jrun server>
> #JRunConfig SendTimeout 15 > socket send to a jrun server>
> # AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
> #
>
>
>
> ------------------------------------------------------------ ------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.733 / Virus Database: 271.1.1/2689 - Release Date: 02/15/10 02:35:00
>
>


------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Re: can"t start apache

--0016e6d77e88666c76047fbb00d1
Content-Type: text/plain; charset=ISO-8859-1

The server is windows xp pro.

On Mon, Feb 15, 2010 at 2:58 PM, Daniel Reinhardt
wrote:

>
> --------------------------------------------------
> From: "Matthew Smith"
> Sent: 15 February, 2010 18:42
> To:
> Subject: Re: [users@httpd] can't start apache
>
>
> Ok, I figured it out. I was using a mapped drive for the document root.
>> Maybe it is a permission issue? I have given full control to everyone, so
>> I'm not sure what it is.
>>
>> On Mon, Feb 15, 2010 at 12:17 PM, Matthew Smith >> >wrote:
>>
>> I hadn't set up the static lease on my router when I installed apache.
>>> 110
>>> was the original ip. I have since set up the server to use 192.168.1.2.
>>> I
>>> am connecting to it through remote desktop at .2 right now. Do I need to
>>> change anywhere else because of the new ip?
>>>
>>>
>>> On Mon, Feb 15, 2010 at 11:39 AM, Jeff Trawick
>>> wrote:
>>>
>>> On Mon, Feb 15, 2010 at 12:06 PM, Matthew Smith
>>>> wrote:
>>>> > The user account I am logged in as is an admin.
>>>> >
>>>> > 192.168.1.2 is the ip address assigned to the computer.
>>>>
>>>> Are you sure? Do you have multiple interfaces and/or IPs?
>>>>
>>>> Apache retrieved 192.168.1.110 as the primary address:
>>>>
>>>> "httpd.exe: Could not reliably determine the server's fully qualified
>>>> domain name, using 192.168.1.110 for ServerName"
>>>>
>>>> ------------------------------------------------------------ ---------
>>>> The official User-To-User support forum of the Apache HTTP Server
>>>> Project.
>>>> See for more info.
>>>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>>>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>>>> For additional commands, e-mail: users-help@httpd.apache.org
>>>>
>>>>
>>>>
>>>
>>
> Matt,
>
> The process creates a PID on the main drive, using a shared drive wouldn't
> prevent httpd from listening on port 80. You need an account with
> administrative privileges to Run Apache. I am guessing your account doesn't
> have admin rights. Can you provide us with what version of Windows you are
> running?
>
> Thanks,
> Daniel
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e6d77e88666c76047fbb00d1
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

The server is windows xp pro.

Re: can"t start apache

--0016e6d7e06cf20a3e047fbb05d9
Content-Type: text/plain; charset=ISO-8859-1

I don't think it is the router. If I set the root to a local directory, I
can get apache to start and serve pages fine. It fails if I use a mapped
drive.

The mapped drive has permissions set to everyone full control.

A side question, any way I can add a windows xp account to a windows 7
machine and vice versa? I don't like having full control for everyone.

On Mon, Feb 15, 2010 at 4:37 PM, Paul McFerrin wrote:

> Check your port "forwarding" on your router. It appears that the IP you
> got was on a router and port forwarding for port 80 is not set to
> 192.168.0.1.
>
> Matthew Smith wrote:
>
>> Ok, i found this and tried what it said:
>>
>> http://www.issociate.de/board/post/474531/2.2.6_won't_start_ -_The_Apache2.2_service_terminated_with_service-specific_err or_1_(0x1)..html<
>> http://www.issociate.de/board/post/474531/2.2.6_won%27t_star t_-_The_Apache2.2_service_terminated_with_service-specific_e rror_1_%280x1%29..html
>> >
>>
>> I had a directory error which I have resolved.
>> Now I get :
>> C:\Program Files\Apache Software Foundation\Apache2.2\bin>httpd.exe -t
>> Syntax OK
>> But when I try to start the service, I still get
>> The requested operation has failed.
>>
>>
>> On Mon, Feb 15, 2010 at 11:11 AM, Matthew Smith >> chedderslam@gmail.com>> wrote:
>>
>> Here the conf. I commented out the vhosts and ColdFusion stuff to
>> see if it would work but it still doesn't. Maybe someone more
>> familiar than me will spot something?
>> Sorry for the long post.
>> ------------------------------------------------------
>> #
>> # This is the main Apache HTTP server configuration file. It
>> contains the
>> # configuration directives that give the server its instructions.
>> # See >> > for detailed information.
>> # In particular, see
>> # >> >
>> # for a discussion of each configuration directive.
>> #
>> # Do NOT simply read the instructions in here without understanding
>> # what they do. They're here only as hints or reminders. If you
>> are unsure
>> # consult the online docs. You have been warned. #
>> # Configuration and logfile names: If the filenames you specify
>> for many
>> # of the server's control files begin with "/" (or "drive:/" for
>> Win32), the
>> # server will use that explicit path. If the filenames do *not* begin
>> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
>> # with ServerRoot set to "C:/Program Files/Apache Software
>> Foundation/Apache2.2" will be interpreted by the
>> # server as "C:/Program Files/Apache Software
>> Foundation/Apache2.2/logs/foo.log".
>> #
>> # NOTE: Where filenames are specified, you must use forward slashes
>> # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
>> # If a drive letter is omitted, the drive on which httpd.exe is
>> located
>> # will be used by default. It is recommended that you always supply
>> # an explicit drive letter in absolute paths to avoid confusion.
>> #
>> # ServerRoot: The top of the directory tree under which the server's
>> # configuration, error, and log files are kept.
>> #
>> # Do not add a slash at the end of the directory path. If you point
>> # ServerRoot at a non-local disk, be sure to point the LockFile
>> directive
>> # at a local disk. If you wish to share the same ServerRoot for
>> multiple
>> # httpd daemons, you will need to change at least LockFile and
>> PidFile.
>> #
>> ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
>> #
>> # Listen: Allows you to bind Apache to specific IP addresses and/or
>> # ports, instead of the default. See also the
>> # directive.
>> #
>> # Change this to Listen on specific IP addresses as shown below to
>> # prevent Apache from glomming onto all bound IP addresses.
>> #
>> #Listen 12.34.56.78:80
>> Listen 192.168.1.2:80
>>
>> #
>> # Dynamic Shared Object (DSO) Support
>> #
>> # To be able to use the functionality of a module which was built
>> as a DSO you
>> # have to place corresponding `LoadModule' lines at this location
>> so the
>> # directives contained in it are actually available _before_ they
>> are used.
>> # Statically compiled modules (those listed by `httpd -l') do not need
>> # to be loaded here.
>> #
>> # Example:
>> # LoadModule foo_module modules/mod_foo.so
>> #
>> LoadModule actions_module modules/mod_actions.so
>> LoadModule alias_module modules/mod_alias.so
>> LoadModule asis_module modules/mod_asis.so
>> LoadModule auth_basic_module modules/mod_auth_basic.so
>> #LoadModule auth_digest_module modules/mod_auth_digest.so
>> #LoadModule authn_alias_module modules/mod_authn_alias.so
>> #LoadModule authn_anon_module modules/mod_authn_anon.so
>> #LoadModule authn_dbd_module modules/mod_authn_dbd.so
>> #LoadModule authn_dbm_module modules/mod_authn_dbm.so
>> LoadModule authn_default_module modules/mod_authn_default.so
>> LoadModule authn_file_module modules/mod_authn_file.so
>> #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
>> #LoadModule authz_dbm_module modules/mod_authz_dbm.so
>> LoadModule authz_default_module modules/mod_authz_default.so
>> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
>> LoadModule authz_host_module modules/mod_authz_host.so
>> #LoadModule authz_owner_module modules/mod_authz_owner.so
>> LoadModule authz_user_module modules/mod_authz_user.so
>> LoadModule autoindex_module modules/mod_autoindex.so
>> #LoadModule cache_module modules/mod_cache.so
>> #LoadModule cern_meta_module modules/mod_cern_meta.so
>> LoadModule cgi_module modules/mod_cgi.so
>> #LoadModule charset_lite_module modules/mod_charset_lite.so
>> #LoadModule dav_module modules/mod_dav.so
>> #LoadModule dav_fs_module modules/mod_dav_fs.so
>> #LoadModule dav_lock_module modules/mod_dav_lock.so
>> #LoadModule dbd_module modules/mod_dbd.so
>> #LoadModule deflate_module modules/mod_deflate.so
>> LoadModule dir_module modules/mod_dir.so
>> #LoadModule disk_cache_module modules/mod_disk_cache.so
>> #LoadModule dumpio_module modules/mod_dumpio.so
>> LoadModule env_module modules/mod_env.so
>> #LoadModule expires_module modules/mod_expires.so
>> #LoadModule ext_filter_module modules/mod_ext_filter.so
>> #LoadModule file_cache_module modules/mod_file_cache.so
>> #LoadModule filter_module modules/mod_filter.so
>> #LoadModule headers_module modules/mod_headers.so
>> #LoadModule ident_module modules/mod_ident.so
>> #LoadModule imagemap_module modules/mod_imagemap.so
>> LoadModule include_module modules/mod_include.so
>> #LoadModule info_module modules/mod_info.so
>> LoadModule isapi_module modules/mod_isapi.so
>> #LoadModule ldap_module modules/mod_ldap.so
>> #LoadModule logio_module modules/mod_logio.so
>> LoadModule log_config_module modules/mod_log_config.so
>> #LoadModule log_forensic_module modules/mod_log_forensic.so
>> #LoadModule mem_cache_module modules/mod_mem_cache.so
>> LoadModule mime_module modules/mod_mime.so
>> #LoadModule mime_magic_module modules/mod_mime_magic.so
>> LoadModule negotiation_module modules/mod_negotiation.so
>> #LoadModule proxy_module modules/mod_proxy.so
>> #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
>> #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
>> #LoadModule proxy_connect_module modules/mod_proxy_connect.so
>> #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
>> #LoadModule proxy_http_module modules/mod_proxy_http.so
>> #LoadModule rewrite_module modules/mod_rewrite.so
>> LoadModule setenvif_module modules/mod_setenvif.so
>> #LoadModule speling_module modules/mod_speling.so
>> #LoadModule ssl_module modules/mod_ssl.so
>> #LoadModule status_module modules/mod_status.so
>> #LoadModule substitute_module modules/mod_substitute.so
>> #LoadModule unique_id_module modules/mod_unique_id.so
>> #LoadModule userdir_module modules/mod_userdir.so
>> #LoadModule usertrack_module modules/mod_usertrack.so
>> #LoadModule version_module modules/mod_version.so
>> #LoadModule vhost_alias_module modules/mod_vhost_alias.so
>>
>>
>> #
>> # If you wish httpd to run as a different user or group, you must run
>> # httpd as root initially and it will switch. #
>> # User/Group: The name (or #number) of the user/group to run httpd as.
>> # It is usually good practice to create a dedicated user and group for
>> # running httpd, as with most system services.
>> #
>> User daemon
>> Group daemon
>>
>>
>> # 'Main' server configuration
>> #
>> # The directives in this section set up the values used by the 'main'
>> # server, which responds to any requests that aren't handled by a
>> # definition. These values also provide defaults for
>> # any containers you may define later in the file.
>> #
>> # All of these directives may appear inside containers,
>> # in which case these default settings will be overridden for the
>> # virtual host being defined.
>> #
>> #
>> # ServerAdmin: Your address, where problems with the server should be
>> # e-mailed. This address appears on some server-generated pages, such
>> # as error documents. e.g. admin@your-domain.com
>>
>> #
>> ServerAdmin chedderslam@gmail.com
>>
>> #
>> # ServerName gives the name and port that the server uses to
>> identify itself.
>> # This can often be determined automatically, but we recommend you
>> specify
>> # it explicitly to prevent problems during startup.
>> #
>> # If your host doesn't have a registered DNS name, enter its IP
>> address here.
>> #
>> #ServerName 192.168.1.2:80
>>
>> #
>> # DocumentRoot: The directory out of which you will serve your
>> # documents. By default, all requests are taken from this
>> directory, but
>> # symbolic links and aliases may be used to point to other locations.
>> #
>> DocumentRoot "z:/inetpub/wwwroot"
>> #
>> # Each directory to which Apache has access can be configured with
>> respect
>> # to which services and features are allowed and/or disabled in that
>> # directory (and its subdirectories).
>> #
>> # First, we configure the "default" to be a very restrictive set of
>> # features. #
>>
>> Options FollowSymLinks
>> AllowOverride None
>> Order deny,allow
>> Deny from all
>>
>> #
>> # Note that from this point forward you must specifically allow
>> # particular features to be enabled - so if something's not working as
>> # you might expect, make sure that you have specifically enabled it
>> # below.
>> #
>> #
>> # This should be changed to whatever you set DocumentRoot to.
>> #
>>
>> #
>> # Possible values for the Options directive are "None", "All",
>> # or any combination of:
>> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch
>> ExecCGI MultiViews
>> #
>> # Note that "MultiViews" must be named *explicitly* ---
>> "Options All"
>> # doesn't give it to you.
>> #
>> # The Options directive is both complicated and important.
>> Please see
>> # http://httpd.apache.org/docs/2.2/mod/core.html#options
>> # for more information.
>> #
>> Options Indexes FollowSymLinks
>> #
>> # AllowOverride controls what directives may be placed in
>> .htaccess files.
>> # It can be "All", "None", or any combination of the keywords:
>> # Options FileInfo AuthConfig Limit
>> #
>> AllowOverride None
>> #
>> # Controls who can get stuff from this server.
>> #
>> Order allow,deny
>> Allow from all
>>
>> #
>> # DirectoryIndex: sets the file that Apache will serve if a directory
>> # is requested.
>> #
>>
>> DirectoryIndex index.cfm
>>
>> #
>> # The following lines prevent .htaccess and .htpasswd files from
>> being
>> # viewed by Web clients.
>> #
>>
>> Order allow,deny
>> Deny from all
>> Satisfy All
>>
>> #
>> # ErrorLog: The location of the error log file.
>> # If you do not specify an ErrorLog directive within a
>> # container, error messages relating to that virtual host will be
>> # logged here. If you *do* define an error logfile for a
>>
>> # container, that host's errors will be logged there and not here.
>> #
>> ErrorLog "logs/error.log"
>> #
>> # LogLevel: Control the number of messages logged to the error_log.
>> # Possible values include: debug, info, notice, warn, error, crit,
>> # alert, emerg.
>> #
>> LogLevel warn
>>
>> #
>> # The following directives define some format nicknames for
>> use with
>> # a CustomLog directive (see below).
>> #
>> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
>> \"%{User-Agent}i\"" combined
>> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>>
>> # You need to enable mod_logio.c to use %I and %O
>> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
>> \"%{User-Agent}i\" %I %O" combinedio
>>
>> #
>> # The location and format of the access logfile (Common
>> Logfile Format).
>> # If you do not define any access logfiles within a
>> # container, they will be logged here. Contrariwise, if you *do*
>> # define per- access logfiles, transactions will be
>> # logged therein and *not* in this file.
>> #
>> CustomLog "logs/access.log" common
>> #
>> # If you prefer a logfile with access, agent, and referer
>> information
>> # (Combined Logfile Format) you can use the following directive.
>> #
>> #CustomLog "logs/access.log" combined
>>
>>
>> #
>> # Redirect: Allows you to tell clients about documents that
>> used to
>> # exist in your server's namespace, but do not anymore. The
>> client
>> # will make a new request for the document at its new location.
>> # Example:
>> # Redirect permanent /foo http://192.168.1.2/bar
>> #
>> # Alias: Maps web paths into filesystem paths and is used to
>> # access content that does not live under the DocumentRoot.
>> # Example:
>> # Alias /webpath /full/filesystem/path
>> #
>> # If you include a trailing / on /webpath then the server will
>> # require it to be present in the URL. You will also likely
>> # need to provide a section to allow access to
>> # the filesystem path.
>> #
>> # ScriptAlias: This controls which directories contain server
>> scripts.
>> # ScriptAliases are essentially the same as Aliases, except that
>> # documents in the target directory are treated as
>> applications and
>> # run by the server when requested rather than as documents
>> sent to the
>> # client. The same rules about trailing "/" apply to ScriptAlias
>> # directives as to Alias.
>> #
>> ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software
>> Foundation/Apache2.2/cgi-bin/"
>>
>>
>> #
>> # ScriptSock: On threaded servers, designate the path to the UNIX
>> # socket used to communicate with the CGI daemon of mod_cgid.
>> #
>> #Scriptsock logs/cgisock
>>
>> #
>> # "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin"
>> should be changed to whatever your ScriptAliased
>> # CGI directory exists, if you have that configured.
>> #
>> >> Foundation/Apache2.2/cgi-bin">
>> AllowOverride None
>> Options None
>> Order allow,deny
>> Allow from all
>>
>> #
>> # DefaultType: the default MIME type the server will use for a
>> document
>> # if it cannot otherwise determine one, such as from filename
>> extensions.
>> # If your server contains mostly text or HTML documents,
>> "text/plain" is
>> # a good value. If most of your content is binary, such as
>> applications
>> # or images, you may want to use "application/octet-stream" instead to
>> # keep browsers from trying to display binary files as though they are
>> # text.
>> #
>> DefaultType text/plain
>>
>> #
>> # TypesConfig points to the file containing the list of
>> mappings from
>> # filename extension to MIME-type.
>> #
>> TypesConfig conf/mime.types
>> #
>> # AddType allows you to add to or override the MIME configuration
>> # file specified in TypesConfig for specific file types.
>> #
>> #AddType application/x-gzip .tgz
>> #
>> # AddEncoding allows you to have certain browsers uncompress
>> # information on the fly. Note: Not all browsers support this.
>> #
>> #AddEncoding x-compress .Z
>> #AddEncoding x-gzip .gz .tgz
>> #
>> # If the AddEncoding directives above are commented-out, then you
>> # probably should define those extensions to indicate media types:
>> #
>> AddType application/x-compress .Z
>> AddType application/x-gzip .gz .tgz
>> #
>> # AddHandler allows you to map certain file extensions to
>> "handlers":
>> # actions unrelated to filetype. These can be either built
>> into the server
>> # or added with the Action directive (see below)
>> #
>> # To use CGI scripts outside of ScriptAliased directories:
>> # (You will also need to add "ExecCGI" to the "Options"
>> directive.)
>> #
>> #AddHandler cgi-script .cgi
>> # For type maps (negotiated resources):
>> #AddHandler type-map var
>> #
>> # Filters allow you to process content before it is sent to
>> the client.
>> #
>> # To parse .shtml files for server-side includes (SSI):
>> # (You will also need to add "Includes" to the "Options"
>> directive.)
>> #
>> #AddType text/html .shtml
>> #AddOutputFilter INCLUDES .shtml
>>
>> #
>> # The mod_mime_magic module allows the server to use various hints
>> from the
>> # contents of the file itself to determine its type. The
>> MIMEMagicFile
>> # directive tells the module where the hint definitions are located.
>> #
>> #MIMEMagicFile conf/magic
>> #
>> # Customizable error responses come in three flavors:
>> # 1) plain text 2) local redirects 3) external redirects
>> #
>> # Some examples:
>> #ErrorDocument 500 "The server made a boo boo."
>> #ErrorDocument 404 /missing.html
>> #ErrorDocument 404 "/cgi-bin/missing_handler.pl
>> "
>>
>> #ErrorDocument 402 http://192.168.1.2/subscription_info.html
>> #
>> #
>> # EnableMMAP and EnableSendfile: On systems that support it,
>> # memory-mapping or the sendfile syscall is used to deliver
>> # files. This usually improves server performance, but must
>> # be turned off when serving from networked-mounted
>> # filesystems or if support for these functions is otherwise
>> # broken on your system.
>> #
>> #EnableMMAP off
>> #EnableSendfile off
>> # Supplemental configuration
>> #
>> # The configuration files in the conf/extra/ directory can be
>> # included to add extra features or to modify the default
>> configuration of
>> # the server, or you may simply copy their contents here and
>> change as
>> # necessary.
>> # Server-pool management (MPM specific)
>> #Include conf/extra/httpd-mpm.conf
>> # Multi-language error messages
>> #Include conf/extra/httpd-multilang-errordoc.conf
>> # Fancy directory listings
>> #Include conf/extra/httpd-autoindex.conf
>> # Language settings
>> #Include conf/extra/httpd-languages.conf
>> # User home directories
>> #Include conf/extra/httpd-userdir.conf
>> # Real-time info on requests and configuration
>> #Include conf/extra/httpd-info.conf
>> # Virtual hosts
>> #Include conf/extra/httpd-vhosts.conf
>> # Local access to the Apache HTTP Server Manual
>> #Include conf/extra/httpd-manual.conf
>> # Distributed authoring and versioning (WebDAV)
>> #Include conf/extra/httpd-dav.conf
>> # Various default settings
>> #Include conf/extra/httpd-default.conf
>> # Secure (SSL/TLS) connections
>> #Include conf/extra/httpd-ssl.conf
>> #
>> # Note: The following must must be present to support
>> # starting without SSL on platforms with no /dev/random
>> equivalent
>> # but a statically compiled-in mod_ssl.
>> #
>>
>> SSLRandomSeed startup builtin
>> SSLRandomSeed connect builtin
>>
>> # JRun Settings
>> #LoadModule jrun_module
>> "C:/ColdFusion8/runtime/lib/wsconfig/1/mod_jrun22.so"
>> #
>> # JRunConfig Verbose false
>> # JRunConfig Apialloc false
>> # JRunConfig Ignoresuffixmap false
>> # JRunConfig Serverstore
>> "C:/ColdFusion8/runtime/lib/wsconfig/1/jrunserver.store"
>> # JRunConfig Bootstrap 127.0.0.1:51800
>>
>> #JRunConfig Errorurl url >> errors>
>> #JRunConfig ProxyRetryInterval 600 >> before trying to reconnect to unreachable clustered server>
>> #JRunConfig ConnectTimeout 15 >> socket connect to a jrun server>
>> #JRunConfig RecvTimeout 300 >> socket receive to a jrun server>
>> #JRunConfig SendTimeout 15 >> socket send to a jrun server>
>> # AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
>> #
>>
>>
>>
>> ------------------------------------------------------------ ------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com Version: 9.0.733 / Virus Database:
>> 271.1.1/2689 - Release Date: 02/15/10 02:35:00
>>
>>
>>
>
>
> ------------------------------------------------------------ ---------
> The official User-To-User support forum of the Apache HTTP Server Project.
> See for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

--0016e6d7e06cf20a3e047fbb05d9
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I don't think it is the router. =A0If I set the root to a local directo=
ry, I can get apache to start and serve pages fine. =A0It fails if I use a =
mapped drive.

Re: can"t start apache

On 16.02.2010 19:25, Matthew Smith wrote:

> I don't think it is the router. If I set the root to a local directory,
> I can get apache to start and serve pages fine. It fails if I use a
> mapped drive.

I don't know much about running Apache on Windows, but I wonder what user
Apache is being run as. I assume it's installed as a service. Even if
'Everyone' includes the account under which Apache is being run, it's
environment still might not have the drive mappings that you yourself see
when you're logged in. Perhaps using \\othermachine\sharename instead of
mapped drive letter will do the trick.

--
Toomas

------------------------------------------------------------ ---------
The official User-To-User support forum of the Apache HTTP Server Project.
See for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org